HardLabs

Time-O-Mat TouchBar H02

Vedatori·Time-O-Mat·Hardware/Time-O-Mat_TouchBar/Time-O-Mat_TouchBar_H02/Time-O-Mat_TouchBar_H02.kicad_pcb

Time-O-Mat TouchBar H02 PCB layout, top view — open source board by Vedatori

About the Time-O-Mat TouchBar H02 PCB

Time-O-Mat TouchBar H02 is an open source PCB design by Vedatori, published on GitHub. It is a 2-layer board measuring 240 × 10 mm, with 10 components from 2 distinct parts.

Other key parts include the Double_Touch_Pad. By type, the board carries 6 connectors and 4 ICs.

It belongs with the sensors designs in this gallery.

From the project

Addressable LED clock kit aimed for usage in STEM education. The ultimate solution to time telling...

If the USB C standard in the cable and power adapter in use is properly implemented, one of the CC pins should always read 0V and the second one should be on one of the following voltage levels: 0,42V - legcy USB (1000mA most of the times) 0,94V - 1500mA 1,68V - 3000mA The order of CC pins (e.g. if CC1 is 0V and CC2 is one of the three voltages or vice versa) is determined by the orientation of the cable and does not matter in our application.

Main components on the Time-O-Mat TouchBar H02

Double_Touch_Pad

Time-O-Mat TouchBar H02 bill of materials (BOM)

10 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
Double_Touch_Pad
U1, U2, U3, U4
6
Conn_01x01_Male
J1, J2, J3, J4, J5, J6

Time-O-Mat TouchBar H02 design files

The KiCad project lives in the Vedatori/Time-O-Mat repository on GitHub; these links point at the commit this page was built from.

Time-O-Mat TouchBar H02: common questions

How big is the Time-O-Mat TouchBar H02 PCB?

The Time-O-Mat TouchBar H02 measures 240 × 10 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Time-O-Mat TouchBar H02?

10 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Time-O-Mat TouchBar H02 design files?

From the Vedatori/Time-O-Mat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Time-O-Mat TouchBar H02 design in my own project?

The repository has no license, so all rights stay with Vedatori. Use it as a reference, and ask the author before reusing the design.

More boards in Time-O-Mat

Similar boards