Ews tbeam mainboard
venougm·ews-tbeam-mainboard
About the Ews tbeam mainboard PCB
Ews tbeam mainboard is an open source PCB design by venougm, published on GitHub. It is a 2-layer board measuring 205 × 124 mm, with 49 components from 41 distinct parts.
Other key parts include the SP3485, MCP23017 and ADS1115_mod. By type, the board carries 16 connectors, 14 resistors, 6 diodes, 3 ICs, 3 switches and 3 capacitors.
It belongs with the power & battery, audio and rf & radio designs in this gallery.
From the project
Tbeam LilyGo
Carrier / motherboard PCB untuk sistem Early Warning System berbasis LilyGO T-Beam v1.2 (AXP2101). Semua modul tinggal tancap (plug-in) ke board ini: T-Beam, OLED, BME280, sensor gas MQ-135, rain gauge, anemometer, transceiver RS485 untuk baca EPEVER MPPT, buck converter 12V→5V, dan holder baterai 18650 yang dipindah dari T-Beam ke PCB.
Dibuat dengan KiCad 8/9/10. File siap dibuka dan difabrikasi.
Main components on the Ews tbeam mainboard
Ews tbeam mainboard bill of materials (BOM)
49 components, 41 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SP3485 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MCP23017 | SOIC-28W_7.5x17.9mm_P1.27mm | U2 |
| 1 | ADS1115_mod | PinHeader_1x10_P2.54mm_Vertical | U3 |
| 1 | T-BEAM_TOP | PinSocket_1x20_P2.54mm_Vertical | J1 |
| 1 | T-BEAM_BOT | PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | OLED_0.96 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | BME280 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | MQ135 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | RAIN | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J6 |
| 1 | ANEMO | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J7 |
| 1 | DC12V | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J8 |
| 1 | BUCK_IN | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | BUCK_OUT | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | BAT_OUT | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | RJ45_EPEVER | RJ45_Amphenol_54602-x08_Horizontal | J12 |
| 1 | RS485_SCR | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J13 |
| 1 | DFPLAYER | PinHeader_1x06_P2.54mm_Vertical | J14 |
| 1 | RELAY_MOD | PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | SIREN_OUT | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J16 |
| 1 | 21700 | BatteryHolder_21700_ThroughHole | BT1 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2A | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | ROLE | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | SPEAKER | PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | BATT_ONOFF | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | TEST | SW_PUSH_6mm | SW2 |
| 1 | SILENCE | SW_PUSH_6mm | SW3 |
| 1 | SR360 | D_SMA | D1 |
| 1 | SMBJ18A | D_SMB | D2 |
| 1 | LED_PWR | LED_0805_2012Metric | D3 |
| 1 | LED_LORA | LED_0805_2012Metric | D4 |
| 1 | LED_ALM | LED_0805_2012Metric | D5 |
| 1 | LED_FLT | LED_0805_2012Metric | D6 |
| 1 | 100nF | C_0805_2012Metric | C1 |
| 1 | 470uF | CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 220uF | CP_Radial_D6.3mm_P2.50mm | C3 |
| 3 | 10k | R_0805_2012Metric | R1, R3, R4 |
| 2 | 20k | R_0805_2012Metric | R2, R13 |
| 1 | 120R | R_0805_2012Metric | R5 |
| 5 | 1k | R_0805_2012Metric | R6, R7, R8, R9, R14 |
| 2 | 100k | R_0805_2012Metric | R10, R12 |
| 1 | 27k | R_0805_2012Metric | R11 |
Ews tbeam mainboard design files
The KiCad project lives in the venougm/ews-tbeam-mainboard repository on GitHub; these links point at the commit this page was built from.
- Layoutews-tbeam-mainboard.kicad_pcb
- Schematicews-tbeam-mainboard.kicad_sch
- BOMBOM.md
Ews tbeam mainboard: common questions
How big is the Ews tbeam mainboard PCB?
The Ews tbeam mainboard measures 205 × 124 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ews tbeam mainboard?
49 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ews tbeam mainboard design files?
From the venougm/ews-tbeam-mainboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ews tbeam mainboard design in my own project?
The repository has no license, so all rights stay with venougm. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k