Control
versioduo·control
About the Control PCB
Control is an open source Microchip SAM PCB design by versioduo, published on GitHub. It is a 4-layer board measuring 60 × 35 mm, with 48 components from 30 distinct parts.
Its main chip is the ATSAMD51G, from the Microchip SAM family. Other key parts include the TPS78433QWDRBRQ1, 74AHC1G125, TLP2361 and TPSM33620S5QRDNRQ1. By type, the board carries 18 capacitors, 8 connectors, 6 ICs, 6 resistors, 4 diodes and 2 switches.
It belongs with the test & measurement and audio designs in this gallery.
From the project
⚙️ MIDI Instrument Controller

Main components on the Control
Control bill of materials (BOM)
48 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD51G Microchip Technology | QFN-48-1EP_7x7mm_P0.5mm_EP5.45x5.45mm_ThermalVias | U1 |
| 1 | TPS78433QWDRBRQ1 Texas Instruments | VSON-8-1_3x3mm_P0.65_EP1.65x2.4mm | U2 |
| 1 | ~ | VSON-10-4-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias | U3 |
| 1 | 74AHC1G125 Texas Instruments | SOT-23-5 | U4 |
| 1 | TLP2361 Toshiba | SO-5-6_4.55x3.7mm_P1.27mm | U5 |
| 1 | TPSM33620S5QRDNRQ1 Texas Instruments | QFN-11 | U6 |
| 1 | 32k768 ABRACON | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 5 | WAGO 2065-100 WAGO | 2065-100 | J1, J2, J6, J7, J8 |
| 1 | DX07S016JA3 JAE Electronics | JAE_DX07S016JA3 | J4 |
| 1 | 2x05_Horizontal Amphenol FCI | PinHeader_2x05_P1.27mm_Horizontal | J5 |
| 1 | SJ2-25404B-SMT-TR Same Sky | CUI_SJ2-25404B-SMT-TR | J9 |
| 1 | RCLAMP0582N Semtech | SLP1210N6 | ESD1 |
| 2 | SKSG Alps Alpine | SKSG | SW1, SW2 |
| 1 | SMBJ33CA Bourns | D_SMB | TVS1 |
| 1 | CG0603MLC-05LE Bourns | D_1608 | TVS2 |
| 1 | Orange ROHM Semiconductor | LED_1608 | D1 |
| 2 | WS2812 Worldsemi | WS2812-2020 | D2, D3 |
| 1 | PMEG2010EPK Nexperia | D_SOD-1608 | D4 |
| 2 | 18p TDK | C_1608 | C1, C2 |
| 1 | 10u TDK | C_1608 | C3 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 0u1 TDK | C_1608 | C4, C5, C6, C7, C10, C11, C12, C14 +1 |
| 2 | 10u TDK | C_2012 | C8, C9 |
| 1 | 10u TDK | C_3225 | C13 |
| 1 | 1u TDK | C_1608 | C15 |
| 2 | 22u TDK | C_3225 | C16, C17 |
| 1 | 100k Vishay | R_1608 | R1 |
| 1 | 330R Vishay | R_1608 | R2 |
| 2 | 5k1 Vishay | R_1608 | R3, R4 |
| 1 | 100R Vishay | R_1608 | R5 |
| 1 | 220R Vishay | R_1608 | R6 |
Control design files
The KiCad project lives in the versioduo/control repository on GitHub; these links point at the commit this page was built from.
- Layoutcontrol.kicad_pcb
- Schematiccontrol.kicad_sch
Control: common questions
What microcontroller does the Control use?
The Control is built around the ATSAMD51G, from the Microchip SAM family.
How big is the Control PCB?
The Control measures 60 × 35 mm, has 4 copper layers and is 1.6222 mm thick.
How many components are on the Control?
48 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Control design files?
From the versioduo/control repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Control design in my own project?
The repository has no license, so all rights stay with versioduo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Control without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416