LoRaLess calc
viktorkondratyuk238-cpu·LoRaLess-calc
About the LoRaLess calc PCB
LoRaLess calc is an open source ESP32 PCB design by viktorkondratyuk238-cpu, published on GitHub. It is a 2-layer board measuring 190 × 175 mm, with 84 components from 19 distinct parts.
Its main chip is the ESP32-C3-WROOM-02U, from the ESP32 family. Other key parts include the MCP23017X-X-SO, MCP73831-2-OT and AP2112K-3.3. By type, the board carries 31 switches, 30 diodes, 8 capacitors, 8 resistors, 4 ICs and 3 connectors.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
LoRa-less calculator: ESP32-C3 PCB, firmware, and tests
A handheld calculator built around an ESP32-C3. It has a keypad, a small OLED screen, and it passes messages to other calculators over ESP-NOW (the chip's built-in radio, not LoRa).
Status: the design and firmware are in progress. The firmware compiles and its logic tests pass on a PC. Nothing has run on the physical board yet. See PROGRESS.md for what is done and what is still open.
Main components on the LoRaLess calc
LoRaLess calc bill of materials (BOM)
84 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017X-X-SO MCP23017x-x-SO | SOIC-28W_7.5x17.9mm_P1.27mm | U1 |
| 1 | MCP73831-2-OT | SOT-23-5 | U3 |
| 1 | ESP32-C3-WROOM-02U | ESP32-C3-WROOM-02U | U4 |
| 1 | AP2112K-3.3 | SOT-23-5 | U5 |
| 1 | C165948 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | PinHeader_1x04_P2.54mm_Vertical | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LipoCable | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 30 | SW_Push | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +22 |
| 1 | C431540 SW_SPDT | SW_SPDT_Shouhan_MSK12C02 | SW31 |
| 30 | 1N4148 | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +22 |
| 2 | C15850 10 microfarad | C_0805_2012Metric | C1, C2 |
| 2 | 100NF 100nF | C_0603_1608Metric | C5, C6 |
| 1 | 10UF 10uF | C_0805_2012Metric | C7 |
| 2 | 4.7UF 4.7uF | C_0805_2012Metric | C8, C9 |
| 1 | 1UF 1uF | C_0603_1608Metric | C10 |
| 2 | C23186 5,1k | R_0603_1608Metric | R1, R2 |
| 1 | 2k | R_0603_1608Metric | R3 |
| 2 | 4.7K 4.7k | R_0603_1608Metric | R6, R7 |
| 3 | 10K 10k | R_0603_1608Metric | R8, R9, R10 |
LoRaLess calc design files
The KiCad project lives in the viktorkondratyuk238-cpu/LoRaLess-calc repository on GitHub; these links point at the commit this page was built from.
LoRaLess calc: common questions
What microcontroller does the LoRaLess calc use?
The LoRaLess calc is built around the ESP32-C3-WROOM-02U, from the ESP32 family.
How big is the LoRaLess calc PCB?
The LoRaLess calc measures 190 × 175 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LoRaLess calc?
84 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LoRaLess calc design files?
From the viktorkondratyuk238-cpu/LoRaLess-calc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LoRaLess calc design in my own project?
The repository has no license, so all rights stay with viktorkondratyuk238-cpu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LoRaLess calc without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k