10 open source boards using the ESP32-C3-WROOM-02U
Real designs built with the ESP32-C3-WROOM-02U, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Serialsentinel
gcormier
82 × 68.9 mm68 parts4LNo license3ESP32
IoT Gateway STM32F407VGTx
minhtenlado
146.1 × 112.6 mm184 parts6LNo license2ESP32
Esp ev switch
valletw
99.9 × 58.4 mm78 parts4LMIT1ESP32
LoRaLess calc
viktorkondratyuk238-cpu
190 × 175 mm84 parts2LNo license0ESP32
ESP32-Controller
Prajesh-Nair
152 × 104.5 mm37 parts2LNo license0ESP32
AetherLink
FBIopeningUPP
27 × 43 mm37 parts4LNo license0ESP32
J-Deck
Quadcoach
152 × 104.5 mm37 parts2LNo license0ESP32
Electronic Throttle Controller
Nomalah
27.8 × 69.7 mm38 parts2LNo license0ESP32
Shift Control Unit
Nomalah
34.4 × 31.2 mm25 parts2LNo license0ESP32
Radianite-Schtick
RadianiteComputers
22 × 65 mm50 parts4LNo license0
How designs wire the ESP32-C3-WROOM-02U
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ESP32-C3-WROOM-02U connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 12 kΩ).
- The EN pin has a capacitor to GND on 8 of 9 designs, most often 1 µF (then 10 µF).
- The 3V3 pin is tied to 3.3V on 9 of 9 designs.
- The IO0 pin is left unconnected on 7 of 9 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 1 | Connected to: 3.3V 100% | — |
| ENpin 2 | Connected to: A connector 22% |
|
| IO8pin 7 | Connected to: Signal 78% · not connected 22% |
|
| IO9pin 8 | Connected to: A connector 22% · not connected 22% |
|
| GNDpin 9, 19 | Connected to: GND 89% | — |
| IO18pin 13 | Connected to: A connector 22% · not connected 33% |
|
| IO19pin 14 | Connected to: A connector 22% · not connected 33% |
|
| IO2pin 16 | Connected to: Stick 1 22% · not connected 33% |
|
| IO0pin 18 | Connected to: Not connected 78% · a signal 22% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Serialsentinel by gcormier, IoT Gateway STM32F407VGTx by minhtenlado, Esp ev switch by valletw and AetherLink by FBIopeningUPP.
The ESP32-C3-WROOM-02U in open source designs
The gallery holds 10 open source boards using the ESP32-C3-WROOM-02U from 9 GitHub repositories; a typical one measures about 91 × 69.3 mm and carries around 44 components.
50% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.
The most starred is Serialsentinel by gcormier.
Parts used alongside the ESP32-C3-WROOM-02U
Microcontrollers on boards using the ESP32-C3-WROOM-02U
What boards using the ESP32-C3-WROOM-02U are built for
ESP32-C3-WROOM-02U: common questions
Where can I find a ESP32-C3-WROOM-02U reference design?
Each of the 10 boards on this page is a real design using the ESP32-C3-WROOM-02U. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-C3-WROOM-02U EN pin?
The EN pin has a pull-up to 3.3V on 8 of 9 designs, most often 10 kΩ (then 12 kΩ). Counted from the KiCad layouts of 9 open source designs using the ESP32-C3-WROOM-02U.
How is the ESP32-C3-WROOM-02U 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the ESP32-C3-WROOM-02U.
How is the ESP32-C3-WROOM-02U IO0 pin connected?
The IO0 pin is left unconnected on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the ESP32-C3-WROOM-02U.
What parts are used alongside the ESP32-C3-WROOM-02U?
The AMS1117-3.3, AP2112K-3.3, AP2114H-3.3TRG1, DW01A and Stick 1 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-C3-WROOM-02U use?
Most are built on ESP32 (10).
How big is a typical board using the ESP32-C3-WROOM-02U?
The median is 91 × 69.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the ESP32-C3-WROOM-02U?
By GitHub stars, Serialsentinel by gcormier, with 3 stars.
Can I simulate one of these boards using the ESP32-C3-WROOM-02U before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.