Leos-F26-radio

VIP-LES·leos-F26-radio-pcb

Leos-F26-radio PCB layout, top view — open source RP2040/RP2350 board by VIP-LES

About the Leos-F26-radio PCB

Leos-F26-radio is an open source RP2040/RP2350 PCB design by VIP-LES, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 22 components from 13 distinct parts.

Its main chip is the PIM724, from the RP2040/RP2350 family. Other key parts include the MCP2518FDT-E/SL, MCP2562FDT-H/SN and E22-900M30S. By type, the board carries 13 capacitors, 3 ICs, 2 connectors, 1 module, 1 crystal and 1 antenna.

It belongs with the rf & radio designs in this gallery.

From the project

radio pcb updated fall 2026

This repository contains the KiCad schematic and PCB layout for the LEOS Radio PCB made fall 2026. The board integrates a Raspberry Pi Pico, an E22-900M30S LoRa radio module, and a CAN-FD interface.

The Raspberry Pi Pico communicates with the radio module through SPI1 and the MCP2518FD CAN-FD controller through SPI0. An MCP2562FD transceiver connects the CAN controller to the LEOS CAN bus. An SMA connector provides the connection for an external antenna.

Leos-F26-radio, from the project README
From the project README

Main components on the Leos-F26-radio

Leos-F26-radio bill of materials (BOM)

22 components, 13 distinct parts.

QtyPartRefs
1
MCP2518FDT-E/SL
MCP2518FD
Microchip
U1
1
MCP2562FDT-H/SN
MCP2562FD
Microchip
U2
1
E22-900M30S
U3
1
PIM724
RaspberryPi Pico
Pimoroni
A1
1
ECS-400-10-37B2-CKY-TR
40 MHz
ECS Inc,
Y1
2
0436500409
MicroFit_1x4
Molex
J1, J2
1
0732511153
900MHz SMA
Molex
ANT1
2
CL21C100CBANNNC
10p
Samsung Electro-Mechanics
C1, C2
5
CL21B104KBCNNNC
0.1u
Samsung Electro-Mechanics
C3, C5, C7, C10, C12
3
C0805C105K3RACTU
1u
KEMET
C4, C6, C13
2
CL31B226MPHNNNE
22u
Samsung Electro-Mechanics
C8, C9
1
CL21B106KOQNNNE
10u
Samsung Electro-Mechanics
C11
1
CRCW080510K0FKEA
10k
Vishay Dale
R2

Leos-F26-radio design files

The KiCad project lives in the VIP-LES/leos-F26-radio-pcb repository on GitHub; these links point at the commit this page was built from.

Leos-F26-radio: common questions

What microcontroller does the Leos-F26-radio use?

The Leos-F26-radio is built around the PIM724, from the RP2040/RP2350 family.

How big is the Leos-F26-radio PCB?

The Leos-F26-radio measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Leos-F26-radio?

22 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Leos-F26-radio design files?

From the VIP-LES/leos-F26-radio-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Leos-F26-radio design in my own project?

The repository has no license, so all rights stay with VIP-LES. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Leos-F26-radio without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards