5 open source boards using the MCP2562FDT-H/SN

Real designs built with the MCP2562FDT-H/SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the MCP2562FDT-H/SN

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP2562FDT-H/SN connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_3 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • The VIO_5 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • The CANH_7 pin has a series resistor on 5 of 5 designs, most often 120 Ω.
  • The CANL_6 pin has a series resistor on 4 of 5 designs, most often 120 Ω.
VSS_2pin 2Connected to: GND 100%
VDD_3pin 3Connected to: 5V 100%
  • Decoupling capacitor on 100% · 100 nF (5)
VIO_5pin 5Connected to: VDD 100%
  • Decoupling capacitor on 100% · 100 nF (5)
CANL_6pin 6Connected to: A connector 100%
  • Series resistor on 80% · 120 Ω (4)
CANH_7pin 7Connected to: A connector 100%
  • Series resistor on 100% · 120 Ω (5)
STBY_8pin 8Connected to: GND 80% · a signal 20%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 2027-SAE-Electric-VCU by VikingMotorsports, Leos-F26-power pcb by clee303, Leos efm pcb by VIP-LES and Leos-F26-radio pcb by VIP-LES.

The MCP2562FDT-H/SN in open source designs

The gallery holds 5 open source boards using the MCP2562FDT-H/SN from 5 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 22 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is 2027-SAE-Electric-VCU by VikingMotorsports.

Parts used alongside the MCP2562FDT-H/SN

Microcontrollers on boards using the MCP2562FDT-H/SN

What boards using the MCP2562FDT-H/SN are built for

MCP2562FDT-H/SN: common questions

Where can I find a MCP2562FDT-H/SN reference design?

Each of the 5 boards on this page is a real design using the MCP2562FDT-H/SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP2562FDT-H/SN VDD_3 pin?

The VDD_3 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MCP2562FDT-H/SN.

What decoupling capacitors do designs use on the MCP2562FDT-H/SN VIO_5 pin?

The VIO_5 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MCP2562FDT-H/SN.

What resistor goes on the MCP2562FDT-H/SN CANH_7 pin?

The CANH_7 pin has a series resistor on 5 of 5 designs, most often 120 Ω. Counted from the KiCad layouts of 5 open source designs using the MCP2562FDT-H/SN.

Which microcontrollers do boards using the MCP2562FDT-H/SN use?

Most are built on RP2040/RP2350 (4) and STM32 (1).

How big is a typical board using the MCP2562FDT-H/SN?

The median is 100 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCP2562FDT-H/SN?

By GitHub stars, 2027-SAE-Electric-VCU by VikingMotorsports, with 3 stars.

Can I simulate one of these boards using the MCP2562FDT-H/SN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part