MusicNote
ViratS-best·MusicNote·Hardware/MusicNote.kicad_pcb
About the MusicNote PCB
MusicNote is an open source ESP32 PCB design by ViratS-best, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 11 components from 9 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 7 connectors, 3 switches and 1 IC.
It belongs with the audio and displays & leds designs in this gallery.
From the project
MusicNote is an ESP32-S3-powered synthesizer like HiChord!
MusicNote is an ESP32-S3-powered synthesizer like HiChord!
The design uses a Waveshare ESP32-S3-Zero, one MPR121 capacitive touch controller, an I2C OLED display, an analog joystick, three push buttons, and a MAX98357A I2S amplifier.
I had to change some stuff in the firmware to make it work for my project.
Lastly, I did consult AI when I was stuck with some of the firmware. (The TYPE-2 project firmware is really advanced, and I needed some help on where to change things, but I did most of it by myself, with the consultation of AI)
Main components on the MusicNote
MusicNote bill of materials (BOM)
11 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x12 | PinHeader_1x12_P2.54mm_Vertical | J5 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Capacitive Touch Buttons | Capictance Keys | J7 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
MusicNote design files
The KiCad project lives in the ViratS-best/MusicNote repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/MusicNote.kicad_pcb
- SchematicHardware/MusicNote.kicad_sch
MusicNote: common questions
What microcontroller does the MusicNote use?
The MusicNote is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the MusicNote PCB?
The MusicNote measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MusicNote?
11 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the MusicNote design files?
From the ViratS-best/MusicNote repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MusicNote design in my own project?
The repository has no license, so all rights stay with ViratS-best. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MusicNote without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k