Double electronic load
virtual-machinist·double-electronic-load
About the Double electronic load PCB
Double electronic load is an open source PCB design by virtual-machinist, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 49.1 × 51.1 mm, with 33 components from 12 distinct parts.
Other key parts include the TL431LP and LM358. By type, the board carries 20 resistors, 5 capacitors, 3 ICs, 3 connectors and 2 transistors.
It belongs with the power & battery designs in this gallery.
From the project
LM358-based double electronic load
I needed a quick, cheap and simple method of testing the capacity of a rather large batch of small Li-ion cells to bin them and assemble a larger battery.
The testers I obtained to measure the actual capacity (ZB2L3) had a simple 15 Ohm resistor as a load. Measuring capacity with a resistor can be imprecise, because the current drops together with the voltage as the cell discharges and this may give greater capacity than you would normally expect.

Main components on the Double electronic load
Double electronic load bill of materials (BOM)
33 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL431LP | TO-92L_HandSolder | U1, U3 |
| 1 | LM358 | DIP-8_W7.62mm_LongPads | U2 |
| 2 | SFP50N06 | TO-220-3_Vertical | Q1, Q2 |
| 3 | Screw_Terminal_01x02 | Lianzhe_LZ128_D-508_2 | J1, J2, J3 |
| 3 | 100n | C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C2, C4 |
| 2 | 1n | C_Disc_D5.1mm_W3.2mm_P5.00mm | C3, C5 |
| 10 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R5, R7, R8, R11, R12, R15 +2 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R13 |
| 2 | 2k | Potentiometer_Bourns_3296W_Vertical | R4, R14 |
| 2 | 220k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R16 |
| 2 | 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R19 |
| 2 | 0.22R 5W | R_Box_L14.0mm_W5.0mm_P9.00mm | R10, R20 |
Double electronic load design files
The KiCad project lives in the virtual-machinist/double-electronic-load repository on GitHub; these links point at the commit this page was built from.
Double electronic load: common questions
How big is the Double electronic load PCB?
The Double electronic load measures 49.1 × 51.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Double electronic load?
33 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Double electronic load design files?
From the virtual-machinist/double-electronic-load repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Double electronic load design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which virtual-machinist chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k