LoRaWAN Crop-Link
vishalqsoni·LoRaWAN_Crop-Link
About the LoRaWAN Crop-Link PCB
LoRaWAN Crop-Link is an open source ESP32 PCB design by vishalqsoni, published on GitHub under the MIT license. It is a 2-layer board measuring 95 × 50 mm, with 48 components from 32 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the CN3791, AI-THINKER-RA-02 and AP2114H-3.3. By type, the board carries 13 connectors, 11 capacitors, 11 resistors, 5 ICs, 5 diodes and 1 battery holder.
It belongs with the iot & wireless, rf & radio and sensors designs in this gallery.
From the project
Crop Link is a LoRa-based IoT data logging and communication system designed for reliable sensor data transmission from remote agricultural fields to the cloud Using LoRaWAN. The system operates independently of GSM or cellular networks.
Main components on the LoRaWAN Crop-Link
LoRaWAN Crop-Link bill of materials (BOM)
48 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CN3791 | cn3763A | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | AI-THINKER-RA-02 Ai-Thinker-Ra-02 | Ai-Thinker-Ra-01-LoRa | U3 |
| 2 | AP2114H-3.3 | SOT-223-3_TabPin2 | U4, U5 |
| 1 | 1.205VOLT 1.205volt | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | UART0 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | 2171790001 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
| 1 | CONN_01X07_FEMALE Conn_01x07_Female | PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | MJ-179PH | 12Volt_Socket | J6 |
| 4 | CONN_01X02 Conn_01x02 | C_0201_0603Metric | J7, J8, J9, J10 |
| 1 | flash | PinHeader_1x05_P2.54mm_Vertical | J12 |
| 1 | CONN_01X03_FEMALE Conn_01x03_Female | PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | 532530470 | PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | CONN_01X05_FEMALE Conn_01x05_Female | PinHeader_1x05_P1.27mm_Vertical | J16 |
| 1 | 18650_CELL_HOLDER 18650_cell_holder | 18650_cell_holder | BT1 |
| 1 | SW_Push_DPDT | DPDT_switch_angled | SW2 |
| 1 | 3407A MOSFet | SOT-23 | D1 |
| 2 | SS34 | D_SMA | D2, D3 |
| 1 | CHAR | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | Done | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47UH 47uh | L_Coilcraft_MSS1210-XXX | L1 |
| 2 | 10 uf C_Polarized | CP_Elec_4x5.4 | C1, C2 |
| 6 | 4.7UF 4.7uf | C_0603_1608Metric | C3, C4, C8, C9, C10, C11 |
| 1 | 470NF 470nf | C_0603_1608Metric | C5 |
| 1 | 220NF 220nf | C_0603_1608Metric | C6 |
| 1 | 100NF 100nf | C_0603_1608Metric | C7 |
| 3 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R10, R11 |
| 1 | 120E | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 50K | 50K_preset | R3 |
| 2 | 2.4E | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R5 |
| 2 | 5.1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 4.7K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
LoRaWAN Crop-Link design files
The KiCad project lives in the vishalqsoni/LoRaWAN_Crop-Link repository on GitHub; these links point at the commit this page was built from.
- Layout3_LAYOUT.kicad_pcb
- BOMBOM.csv
LoRaWAN Crop-Link: common questions
What microcontroller does the LoRaWAN Crop-Link use?
The LoRaWAN Crop-Link is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the LoRaWAN Crop-Link PCB?
The LoRaWAN Crop-Link measures 95 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LoRaWAN Crop-Link?
48 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LoRaWAN Crop-Link design files?
From the vishalqsoni/LoRaWAN_Crop-Link repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LoRaWAN Crop-Link design in my own project?
Yes, under the terms of its MIT license, which vishalqsoni chose for the repository.
Can I test firmware for the LoRaWAN Crop-Link without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k