20 open source boards using the Ai-Thinker-Ra-02
Real designs built with the Ai-Thinker-Ra-02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Raesp gateway
cziter15
47 × 33 mm17 parts4LGPL-3.011RP2040/RP2350
Tallytime hardware
micro-henry
80 × 50 mm88 parts4LCERN-OHL-S-2.03STM32
ProPrj Project Ignis 2026-06-03
Shourya-x
123.2 × 67.9 mm71 parts2LNo license3RP2040/RP2350
ANGAZA ELIMU
R-Mutura
131 × 78.5 mm207 parts4LNo license2ESP32
RAMS
JanClyde05
42 × 32 mm67 parts2LNo license1STM32
Tafiti Ground Comms
tafiti-org
64.5 × 73.6 mm64 parts4LMIT1ESP32
NicE-Buoy
pnn69
194 × 40 mm227 parts4LNo license0ESP32
V3sDevBoard
sentoxo
100 × 85 mm163 parts4LMIT0ESP32
Hardware
nguyenmihn
116.2 × 69.6 mm163 parts2LApache-2.00ESP32
SDR-IOT-project
AfriOrbit
75.5 × 82.7 mm88 parts4LNo license0AVR/Arduino
Flying thing that crashes
astra-the-boop
79.2 × 65 mm77 parts2LNo license0STM32
STM32-Walkie-Talkie
ANSHUMANDOCX
55 × 45 mm69 parts2LNo license0STM32
Tafiti Ground Comms
geraldombuthia
64.5 × 73.6 mm64 parts4LNo license0ESP32
LoRaWAN Crop-Link
vishalqsoni
95 × 50 mm48 parts2LMIT0ESP32
Lora Management
hari2128-cell
65 × 77.5 mm41 parts2LNo license0ESP32
Lorawatch
dharaneesh-m-oss
65 × 77.5 mm41 parts2LNo license0RP2040/RP2350
Scriptstick
axellse
46.1 × 18.7 mm35 parts2LNo license0STM32
Tafiti Onboard Comms
tafiti-org
90.2 × 96 mm44 parts4LMIT1ESP32
DATN
nguyenmihn
86.7 × 59.5 mm110 parts2LApache-2.00STM32
Tafiti Onboard Comms
geraldombuthia
90.2 × 96 mm44 parts4LNo license0
How designs wire the Ai-Thinker-Ra-02
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the Ai-Thinker-Ra-02 connects to, and the resistors, capacitors and other passives placed on it.
- The DIO4 pin is left unconnected on 17 of 17 designs.
- The DIO5 pin is left unconnected on 17 of 17 designs.
- The DIO3 pin is left unconnected on 16 of 17 designs.
- The DIO2 pin is left unconnected on 14 of 17 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2, 9, 16 | Connected to: GND 99% | — |
| VDDpin 3 | Connected to: 3.3V 82% · a signal 18% |
|
| DIO1pin 6 | Connected to: Not connected 71% · a signal 29% | — |
| DIO2pin 7 | Connected to: Not connected 82% · a signal 18% | — |
| DIO3pin 8 | Connected to: Not connected 94% | — |
| DIO4pin 10 | Connected to: Not connected 100% | — |
| DIO5pin 11 | Connected to: Not connected 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Raesp gateway by cziter15, Tallytime hardware by micro-henry, ProPrj Project Ignis 2026-06-03 by Shourya-x and ANGAZA ELIMU PCB by R-Mutura.
The Ai-Thinker-Ra-02 in open source designs
The gallery holds 20 open source boards using the Ai-Thinker-Ra-02 from 17 GitHub repositories; a typical one measures about 79.6 × 68.8 mm and carries around 68 components.
50% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Raesp gateway by cziter15.
Parts used alongside the Ai-Thinker-Ra-02
Microcontrollers on boards using the Ai-Thinker-Ra-02
What boards using the Ai-Thinker-Ra-02 are built for
Ai-Thinker-Ra-02: common questions
Where can I find a Ai-Thinker-Ra-02 reference design?
Each of the 20 boards on this page is a real design using the Ai-Thinker-Ra-02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Ai-Thinker-Ra-02 DIO4 pin connected?
The DIO4 pin is left unconnected on 17 of 17 designs. Counted from the KiCad layouts of 17 open source designs using the Ai-Thinker-Ra-02.
How is the Ai-Thinker-Ra-02 DIO5 pin connected?
The DIO5 pin is left unconnected on 17 of 17 designs. Counted from the KiCad layouts of 17 open source designs using the Ai-Thinker-Ra-02.
How is the Ai-Thinker-Ra-02 DIO3 pin connected?
The DIO3 pin is left unconnected on 16 of 17 designs. Counted from the KiCad layouts of 17 open source designs using the Ai-Thinker-Ra-02.
What parts are used alongside the Ai-Thinker-Ra-02?
The AMS1117-3.3, BME280, MPU-6050, TP4056-42-ESOP8 and CP2102N-Axx-xQFN24 appear in the most repositories here.
Which microcontrollers do boards using the Ai-Thinker-Ra-02 use?
Most are built on ESP32 (9), STM32 (6), RP2040/RP2350 (3) and AVR/Arduino (1).
How big is a typical board using the Ai-Thinker-Ra-02?
The median is 79.6 × 68.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the Ai-Thinker-Ra-02?
By GitHub stars, Raesp gateway by cziter15, with 11 stars.
Can I simulate one of these boards using the Ai-Thinker-Ra-02 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.