Motopulse
visweshvaras·MotoPulse·motopulse_kicad/motopulse.kicad_pcb
About the Motopulse PCB
Motopulse is an open source ESP32 PCB design by visweshvaras, published on GitHub. It is a 2-layer board measuring 100 × 95 mm, with 8 components from 6 distinct parts.
Its main chip is the ESP32-S3_Left_Header, from the ESP32 family. By type, the board carries 4 connectors, 2 capacitors and 2 resistors.
It belongs with the displays & leds and audio designs in this gallery.
From the project
Project: MotoPulse — Automotive Acoustic Predictive Maintenance Edge AI System Event: IEEE RUAS - Hacktivate 2026 Revision: 2.0 (Digital I2S MEMS + OLED Real-Time Spectrum Hardware) Verification: 0 ERC Violations (100% Pass) | 0 DRC Violations (100% Pass) | 0 Unconnected Nets
Project: MotoPulse — Automotive Acoustic Predictive Maintenance Edge AI System Event: IEEE RUAS - Hacktivate 2026 Revision: 2.0 (Digital I2S MEMS + OLED Real-Time Spectrum Hardware) Verification: 0 ERC Violations (100% Pass) | 0 DRC Violations (100% Pass) | 0 Unconnected Nets
MotoPulse captures automotive mechanical acoustic emissions using high-fidelity digital I2S MEMS microphones, processes spectral features via real-time edge FFTs on an ESP32-S3 microcontroller, and displays real-time frequency diagnostics on an onboard SSD1306 OLED display.
Motopulse bill of materials (BOM)
8 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3_Left_Header | PinHeader_1x22_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3_Right_Header | PinHeader_1x22_P2.54mm_Vertical | J2 |
| 1 | INMP441_Breakout | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | OLED_0.96_I2C | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 2 | 100nF | C_0805_2012Metric | C1, C2 |
| 2 | 4.7k | R_0805_2012Metric | R1, R2 |
Motopulse design files
The KiCad project lives in the visweshvaras/MotoPulse repository on GitHub; these links point at the commit this page was built from.
Motopulse: common questions
What microcontroller does the Motopulse use?
The Motopulse is built around the ESP32-S3_Left_Header, from the ESP32 family.
How big is the Motopulse PCB?
The Motopulse measures 100 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motopulse?
8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Motopulse design files?
From the visweshvaras/MotoPulse repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Motopulse design in my own project?
The repository has no license, so all rights stay with visweshvaras. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Motopulse without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in MotoPulse
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k