Elrs sim panel
VitroidFPV·elrs-sim·kikit-panel/elrs-sim-panel/elrs-sim-panel.kicad_pcb
About the Elrs sim panel PCB
Elrs sim panel is an open source RP2040/RP2350 PCB design by VitroidFPV, published on GitHub. It is a 4-layer board measuring 146 × 98 mm, with 68 components from 36 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the SX1280IMLTRT, ESP8285 and W25Q16JVSS. By type, the board carries 23 capacitors, 16 resistors, 13 connectors, 4 ICs, 3 crystals and 3 switches.
Main components on the Elrs sim panel
Elrs sim panel bill of materials (BOM)
68 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SX1280IMLTRT | QFN50P400X400X100-25N-D | IC1 |
| 1 | ESP8285 | QFN50P500X500X90-33N-D | IC2 |
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q16JVSS | Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U2 |
| 1 | SX1M_12MHZ SX1M_12MHz | Crystal_SMD_SeikoEpson_FA128-4Pin_2.0x1.6mm | X1 |
| 1 | SX1M_26MHZ SX1M_26MHz | Crystal_SMD_SeikoEpson_FA128-4Pin_2.0x1.6mm | X2 |
| 1 | YSO510TP_52MHZ YSO510TP_52MHz | Crystal_SMD_SeikoEpson_FA128-4Pin_2.0x1.6mm | X3 |
| 1 | CONN_01X04 Conn_01x04 | PCB_USB_connector | J1 |
| 1 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | CONN_01X04 Conn_01x04 | PCB_USB_connector_top | J3 |
| 1 | VBUS | PAD_1.5x1.5mm_NO_HOLE | J4 |
| 1 | 3.3V_SW | PAD_1.5x1.5mm_NO_HOLE | J6 |
| 1 | RP_RX | PAD_1.5x1.5mm_NO_HOLE | J7 |
| 1 | RP_TX | PAD_1.5x1.5mm_NO_HOLE | J8 |
| 1 | ESP_RX | PAD_1.5x1.5mm_NO_HOLE | J9 |
| 1 | ESP_TX | PAD_1.5x1.5mm_NO_HOLE | J10 |
| 1 | GND | PAD_1.5x1.5mm_NO_HOLE | J11 |
| 1 | 3.3V | PAD_1.5x1.5mm_NO_HOLE | J12 |
| 1 | DP | PAD_1.5x1.5mm_NO_HOLE | J13 |
| 1 | DN | PAD_1.5x1.5mm_NO_HOLE | J14 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2450FM07A0029T | 2450FM07A0029T | ANT1 |
| 1 | RT9013-33GB | SOT-23-5 | PS1 |
| 1 | TS3A5223RSWR | UQFN-10_1.3x1.8mm_P0.4mm | S1 |
| 2 | C231329 SW_SPST | SW_SPST_B3U-1000P | SW1, SW2 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 2 | SLDA52-2R710G-SITF | ANT-SMD_L5.2-W2.1 | L1, L2 |
| 16 | 100NF 100nF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C10, C11 +8 |
| 2 | 1NF 10nF | C_0402_1005Metric | C7, C8 |
| 1 | 470NF 470nF | C_0402_1005Metric | C9 |
| 1 | 100NF 1uF | C_0402_1005Metric | C12 |
| 2 | 1UF 1uF | C_0402_1005Metric | C20, C21 |
| 1 | 1NF 1nF | C_0402_1005Metric | C23 |
| 7 | 12K 12k | R_0402_1005Metric | R1, R2, R5, R6, R7, R11, R12 |
| 6 | 470 | R_0402_1005Metric | R3, R4, R8, R9, R15, R16 |
| 1 | 1k | R_0402_1005Metric | R10 |
| 2 | 27 | R_0402_1005Metric | R13, R14 |
Elrs sim panel design files
The KiCad project lives in the VitroidFPV/elrs-sim repository on GitHub; these links point at the commit this page was built from.
Elrs sim panel: common questions
What microcontroller does the Elrs sim panel use?
The Elrs sim panel is built around the RP2040, from the RP2040/RP2350 family.
How big is the Elrs sim panel PCB?
The Elrs sim panel measures 146 × 98 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Elrs sim panel?
68 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Elrs sim panel design files?
From the VitroidFPV/elrs-sim repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Elrs sim panel design in my own project?
The repository has no license, so all rights stay with VitroidFPV. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Elrs sim panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in elrs-sim
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k