FechaduraEletronica
vitsantos·FechaduraEletronica-PCB·PCB/fechadura_eletronica/fechadura_eletronica.kicad_pcb
About the FechaduraEletronica PCB
FechaduraEletronica is an open source ESP32 PCB design by vitsantos, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 16 components from 13 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the LM7805 - regulator and LD1117S33TR_SOT223. By type, the board carries 5 connectors, 5 capacitors, 3 ICs, 1 buzzer, 1 switch and 1 resistor.
Main components on the FechaduraEletronica
FechaduraEletronica bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805 - regulator | TO-220-3_Vertical | U1 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U2 |
| 1 | LD1117S33TR_SOT223 | TO-220-3_Vertical | U3 |
| 1 | Relay Module | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | RFID - RC522 | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J2 |
| 1 | LCD 16X2 | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J3 |
| 1 | DY50 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | J5 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | reset button | SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | 100uF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 4 | C | C_Radial_D6.3mm_H7.0mm_P2.50mm | C2, C3, C4, C5 |
| 1 | R5.1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
FechaduraEletronica design files
The KiCad project lives in the vitsantos/FechaduraEletronica-PCB repository on GitHub; these links point at the commit this page was built from.
FechaduraEletronica: common questions
What microcontroller does the FechaduraEletronica use?
The FechaduraEletronica is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the FechaduraEletronica PCB?
The FechaduraEletronica measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FechaduraEletronica?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the FechaduraEletronica design files?
From the vitsantos/FechaduraEletronica-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FechaduraEletronica design in my own project?
The repository has no license, so all rights stay with vitsantos. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FechaduraEletronica without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k