Interview assignment
vlust·interview-assignment·hardware/CurrentSensorUSB/CurrentSensorUSB.kicad_pcb
About the Interview assignment PCB
Interview assignment is an open source Microchip SAM PCB design by vlust, published on GitHub. It is a 2-layer board measuring 49.5 × 45.9 mm, with 24 components from 19 distinct parts.
Its main chip is the ATSAMD21E18A-A, from the Microchip SAM family. Other key parts include the MCP1703Ax-330xxDB, ADS1113IDGS and ADuM1250. By type, the board carries 7 capacitors, 7 resistors, 4 ICs, 2 connectors, 1 crystal and 1 switch.
From the project
Submission for an interview assignment
Built‑in USB Full‑Speed interface simplifies serial‑over‑USB implementation. Proven ecosystem and popularity * E‑Series package (smallest) has more than enough GPIO and ADC channels for this project.
16‑bit resolution yields better than 10 µA resolution over the 4–20 mA span by adjusting the PGA settings. Single‑ended input with onboard reference minimizes external parts. * I²C interface maps cleanly to the SAMD21 peripheral.
Main components on the Interview assignment
Interview assignment bill of materials (BOM)
24 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD21E18A-A | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | MCP1703Ax-330xxDB | SOT-223-3_TabPin2 | U2 |
| 1 | ADS1113IDGS | TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | ADuM1250 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | 32.768kHz, 7pF | Crystal_SMD_0603-4Pin_6.0x3.5mm | Y1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Plug_Molex_105444 | P1 |
| 1 | MEE1S0503SC | Converter_DCDC_Murata_MEE1SxxxxSC_THT | PS1 |
| 1 | SW_Push | SW_MEC_5GSH9 | SW1 |
| 1 | PRTR5V0U2X | SOT-143 | D1 |
| 2 | 1 μF Ceramic | C_0603_1608Metric | C1, C2 |
| 1 | 0.1 μF | C_0603_1608Metric | C3 |
| 1 | C | C_0603_1608Metric | C4 |
| 2 | 6.8pF | C_0603_1608Metric | C5, C6 |
| 1 | 1 μF | C_0603_1608Metric | C7 |
| 1 | 5.1K | R_0603_1608Metric | R1 |
| 1 | R_Shunt 100 | R_Shunt_Ohmite_LVK12 | R2 |
| 4 | 4.7 kΩ | R_0603_1608Metric | R3, R4, R5, R6 |
| 1 | R_F 1 kΩ | R_0603_1608Metric | R7 |
Interview assignment design files
The KiCad project lives in the vlust/interview-assignment repository on GitHub; these links point at the commit this page was built from.
Interview assignment: common questions
What microcontroller does the Interview assignment use?
The Interview assignment is built around the ATSAMD21E18A-A, from the Microchip SAM family.
How big is the Interview assignment PCB?
The Interview assignment measures 49.5 × 45.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Interview assignment?
24 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Interview assignment design files?
From the vlust/interview-assignment repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Interview assignment design in my own project?
The repository has no license, so all rights stay with vlust. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Interview assignment without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416