FanCtrl
vracton·FanCtrl·pcb/FanCtrl.kicad_pcb
About the FanCtrl PCB
FanCtrl is an open source ESP32 PCB design by vracton, published on GitHub. It is a 2-layer board measuring 69.6 × 155.8 mm, with 5 components from 3 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the MT3608. By type, the board carries 3 ICs and 2 transistors.
It belongs with the iot & wireless designs in this gallery.
From the project
An ESP-32-powered fan switch adapter compatible with HomeKit
An ESP32-powered adapter/cover for the Lutron Maestro Fan Control and Light Dimmer that allows for smart functionality, i.e. toggling on and off from a phone.
- Wireless Connectivity: Connect to the switch through Blynk from anywhere - Double Solenoid: Control both switches - extremely quickly - Double Click: Supports double click to set switch to max
1. Solder all components according to the schematic 2. Flash main.ino to the microcontroller 3. 3D print the case files from production/FanCtrlBaseplate.stl and production/FanCtrlCover.stl 4. Install the PCB into the case 5. Secure the top…

Main components on the FanCtrl
FanCtrl bill of materials (BOM)
5 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 2 | MT3608 | SOT-23-6 | U2, U3 |
| 2 | IRLZ44N | TO-220-3_Vertical | Q1, Q2 |
FanCtrl design files
The KiCad project lives in the vracton/FanCtrl repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/FanCtrl.kicad_pcb
- Schematicpcb/FanCtrl.kicad_sch
- BOMproduction/bom.csv
FanCtrl: common questions
What microcontroller does the FanCtrl use?
The FanCtrl is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the FanCtrl PCB?
The FanCtrl measures 69.6 × 155.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FanCtrl?
5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FanCtrl design files?
From the vracton/FanCtrl repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FanCtrl design in my own project?
The repository has no license, so all rights stay with vracton. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FanCtrl without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k