Wasserstand harry b
vrees·wasserstand-harry-b·kicad/Esp32LoraBoard/Esp32LoraBoard.kicad_pcb
About the Wasserstand harry b PCB
Wasserstand harry b is an open source ESP32 PCB design by vrees, published on GitHub. It is a 2-layer board measuring 72 × 65 mm, with 54 components from 33 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the LM3940IMP-3.3 and RFM95W-868S2. By type, the board carries 15 resistors, 10 capacitors, 9 connectors, 7 test points, 6 transistors and 3 ICs.
It belongs with the iot & wireless designs in this gallery.
From the project
- Ubidots: https://industrial.ubidots.com/accounts/signup_industrial/ - Username: HarryBrender - Passwort: siehe Email - Email: harald.brender@gmx.de - harryb.iot.ubidots.com
- Ubidots: https://industrial.ubidots.com/accounts/signup_industrial/ - Username: HarryBrender - Passwort: siehe Email - Email: harald.brender@gmx.de - harryb.iot.ubidots.com
ADC Volt 3.781 6.00 2.951 5.00 2.319 4.00 1.706 3.00 1.081 2.00
Main components on the Wasserstand harry b
Wasserstand harry b bill of materials (BOM)
54 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM3940IMP-3.3 | SOT230P696X180-4N | U1 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U2 |
| 1 | RFM95W-868S2 | HOPERF_RFM9XW_SMD | U3 |
| 1 | UMH3N | SOT65P230X110-6N | Q1 |
| 3 | Si2302DS_NMOS | TSOT-23_HandSoldering | Q2, Q4, Q6 |
| 2 | Si2301DS_PMOS | TSOT-23_HandSoldering | Q3, Q5 |
| 1 | USB_B_Micro | USB_Micro-B_GCT_USB3076-30-A | J1 |
| 1 | Power-Selector | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Testpoints | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | ESP_PROG_JTAG | PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | Prog | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | ext_Measure | PhoenixContact_MSTBVA_2,5_4-G-5,08_1x04_P5.08mm_Vertical | J6 |
| 1 | Measurement-Selector | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | OLED_128x64 | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Pin1-to-GND | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Antenna_Shield | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | AE1 |
| 1 | LiFePo-Batterie | PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical | BT1 |
| 1 | Rotary_Encoder | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | Reset | SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | U_BATT_MEASURE | PinHeader_1x01_P2.54mm_Vertical | TP1 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | U_EXT_ENABLE | PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | VCC_2 | PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | U_EXT_MEASURE | PinHeader_1x01_P2.54mm_Vertical | TP4 |
| 1 | U_BAT_ENABLE | PinHeader_1x01_P2.54mm_Vertical | TP5 |
| 2 | GND | PinHeader_1x01_P2.54mm_Vertical | TP6, TP7 |
| 4 | 100n | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C4, C7, C8 |
| 1 | 10u | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 3 | 1u | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C9, C10 |
| 1 | 220n | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C5 |
| 1 | 1n | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C6 |
| 10 | 10k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R3, R4, R9, R10, R11, R13 +2 |
| 2 | optional | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5, R6 |
| 3 | 100k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R7, R8, R12 |
Wasserstand harry b design files
The KiCad project lives in the vrees/wasserstand-harry-b repository on GitHub; these links point at the commit this page was built from.
Wasserstand harry b: common questions
What microcontroller does the Wasserstand harry b use?
The Wasserstand harry b is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Wasserstand harry b PCB?
The Wasserstand harry b measures 72 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wasserstand harry b?
54 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wasserstand harry b design files?
From the vrees/wasserstand-harry-b repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Wasserstand harry b design in my own project?
The repository has no license, so all rights stay with vrees. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Wasserstand harry b without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k