Basic soldering cert board
vt-amplab·basic-soldering-cert-board
About the Basic soldering cert board
Basic soldering cert board is an open source PCB design by vt-amplab, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 103.4 × 73 mm, with 104 components from 69 distinct parts.
Other key parts include the LM3914, TPD2E001, MIC2185, MCP73833 and TPS2511. By type, the board carries 23 test points, 20 resistors, 18 capacitors, 14 diodes, 11 ICs and 3 transistors.
It belongs with the power & battery designs in this gallery.
From the project
Kicad files for the new basic soldering certification board
basic-soldering-cert-board ==========================
Kicad files for the new basic soldering certification board
Main components on the Basic soldering cert board
Basic soldering cert board bill of materials (BOM)
104 components, 69 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM3914 | PDIP-18 | U1 |
| 2 | TPD2E001 | TO-253-4 | U2, U5 |
| 1 | MIC2185 | so-16 | U3 |
| 1 | MCP73833 | msop-10 | U4 |
| 1 | TPS2511 | msop-8-powerpad | U6 |
| 1 | BATT | BAT-18650-cylinder | U7 |
| 1 | LT1389 | so-8 | U8 |
| 1 | MAX9938 | sot23-5 | U9 |
| 1 | FDC6392S | sot23-6 | U10 |
| 1 | MCP6041 | so-8 | U11 |
| 1 | SI4174DY | si4174dy | Q1 |
| 2 | SI4463CDY | si4463cdy | Q2, Q3 |
| 1 | USB-IN | A108263CT(uUSB) | J1 |
| 1 | USB OUT | A107360(USB-A) | J2 |
| 1 | 3.0A | ptc_1812 | F1 |
| 1 | 1.5A | ptc_1812 | F2 |
| 1 | 10K THERMISTOR | r_1206 | RT1 |
| 1 | VDD | TP | TP1 |
| 1 | VUSB | TP | TP2 |
| 1 | D- | TP | TP3 |
Show 49 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D+ | TP | TP4 |
| 1 | VREG | TP | TP5 |
| 1 | VBAT | TP | TP6 |
| 1 | VSW_REF | TP | TP7 |
| 1 | I to V output | TP | TP8 |
| 1 | RS- | TP | TP9 |
| 1 | RS+ | TP | TP10 |
| 1 | VSYS | TP | TP11 |
| 1 | ~EN DISPLAY | TP | TP12 |
| 1 | VDISP | TP | TP13 |
| 7 | GND | TP | TP14, TP15, TP17, TP18, TP19, TP20, TP21 |
| 1 | VSYS protected | TP | TP16 |
| 1 | L current | TP | TP22 |
| 1 | FB voltage | TP | TP23 |
| 9 | DBL_VIA | DBL_VIA | V1, V2, V3, V4, V5, V6, V7, V11 +1 |
| 1 | 0.15A | led_1206 | D1 |
| 1 | 0.30A | led_1206 | D2 |
| 1 | 0.45A | led_1206 | D3 |
| 1 | 0.60A | led_1206 | D4 |
| 1 | 0.75A | led_1206 | D5 |
| 1 | 0.90A | led_1206 | D6 |
| 1 | 1.05A | led_1206 | D7 |
| 1 | 1.20A | led_1206 | D8 |
| 1 | 1.35A | led_1206 | D9 |
| 1 | 1.50A | led_1206 | D10 |
| 1 | CHARGED | led_1206 | D11 |
| 1 | CHARGING | led_1206 | D12 |
| 1 | PWR IN OK | led_1206 | D13 |
| 1 | B130 | diode_do41 | D14 |
| 1 | 4.7uH | ind_12.5mm | L1 |
| 1 | 477 | c_2917_tant | C1 |
| 8 | 104 | c_1206 | C2, C3, C5, C6, C9, C11, C16, C17 |
| 1 | 103 | cp_2.54mm | C4 |
| 2 | 106 | c_1206 | C7, C13 |
| 1 | 104 | cp_2.54mm | C8 |
| 1 | 105 | cp_2.54mm | C10 |
| 3 | 107 | c_2924_tant | C12, C14, C15 |
| 1 | 226 | c_1206 | C18 |
| 1 | 4k87 | r_pth_2.5x6.5mm | R1 |
| 1 | 130k | r_pth_2.5x6.5mm | R2 |
| 7 | 100k | r_1206 | R3, R4, R13, R15, R16, R19, R20 |
| 1 | 10k | r_pth_2.5x6.5mm | R5 |
| 3 | 4k3 | r_pth_2.5x6.5mm | R6, R8, R11 |
| 1 | 34k | r_1206 | R7 |
| 2 | 1K | r_1206 | R9, R12 |
| 1 | 0.03 | r_1206 | R10 |
| 1 | 31k6 | r_1206 | R14 |
| 1 | 0.05 | 1206-Kelvin | R17 |
| 1 | 1M | r_pth_2.5x6.5mm | R18 |
Basic soldering cert board design files
The KiCad project lives in the vt-amplab/basic-soldering-cert-board repository on GitHub; these links point at the commit this page was built from.
- Layoutpower_supply.kicad_pcb
- BOMbom.xlsx
Basic soldering cert board: common questions
How big is the Basic soldering cert board?
The Basic soldering cert board measures 103.4 × 73 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Basic soldering cert board?
104 components, from 69 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Basic soldering cert board design files?
From the vt-amplab/basic-soldering-cert-board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Basic soldering cert board design in my own project?
Yes, under the terms of its Apache-2.0 license, which vt-amplab chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k