15 open source boards using the MCP73833

Real designs built with the MCP73833, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the MCP73833

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the MCP73833 connects to, and the resistors, capacitors and other passives placed on it.

  • The PROG pin has a resistor to GND on 13 of 13 designs, most often 1 kΩ (then 5.1 kΩ).
  • The VDD pins have a decoupling capacitor on 12 of 13 designs, most often 10 µF (then 1 µF).
  • The VBAT pins have a capacitor to GND on 12 of 13 designs, most often 10 µF (then 1 µF).
  • The THERM pin has a resistor to GND on 7 of 13 designs, most often 10 kΩ.
VDDpin 1, 2Connected to: 5V 85% · a signal 15%
  • Decoupling capacitor on 92% · 10 µF (16), 1 µF (8), 100 nF (2)
STAT1pin 3Connected to: Signal 100%
  • Series resistor on 46% · 470 Ω (4), 1 kΩ (1), 4.3 kΩ (1)
STAT2pin 4Connected to: Signal 85% · not connected 15%
  • Series resistor on 38% · 470 Ω (3), 1 kΩ (1), 4.3 kΩ (1)
VSSpin 5Connected to: GND 100%
PROGpin 6Connected to: Signal 100%
  • Resistor to GND on 100% · 1 kΩ (5), 5.1 kΩ (3), 5 kΩ (3)
PGpin 7Connected to: Signal 54% · not connected 46%
  • Series resistor on 38% · 470 Ω (3), 1 kΩ (1), 4.3 kΩ (1)
THERMpin 8Connected to: Signal 100%
  • Resistor to GND on 54% · 10 kΩ (7)
  • Series resistor on 38% · 1.43 kΩ (4), 0 Ω (1)
VBATpin 9, 10Connected to: A connector 38%, A3908 23% · BATT 38%
  • Capacitor to GND on 92% · 10 µF (12), 1 µF (10), 22 µF (8)
PADpin 11Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PCB business card remake by StuckAtPrototype, ChargeStation by andresR8, Keyboard by MarijnVerschuren and Gap by 0x007E.

The MCP73833 in open source designs

The gallery holds 15 open source boards using the MCP73833 from 14 GitHub repositories; a typical one measures about 52 × 73 mm and carries around 92 components.

60% use four copper layers or more, and 33% carry an open source license.

The most starred is PCB business card remake by StuckAtPrototype.

Microcontrollers on boards using the MCP73833

MCP73833: common questions

Where can I find a MCP73833 reference design?

Each of the 15 boards on this page is a real design using the MCP73833. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MCP73833 PROG pin?

The PROG pin has a resistor to GND on 13 of 13 designs, most often 1 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 13 open source designs using the MCP73833.

What decoupling capacitors do designs use on the MCP73833 VDD pin?

The VDD pins have a decoupling capacitor on 12 of 13 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the MCP73833.

How is the MCP73833 VBAT pin connected?

The VBAT pins have a capacitor to GND on 12 of 13 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the MCP73833.

What parts are used alongside the MCP73833?

The A3908, ESP32-H2-MINI-1, AP2204, TPS631000DRLR and TPS61023DRLR appear in the most repositories here.

Which microcontrollers do boards using the MCP73833 use?

Most are built on ESP32 (7), AVR/Arduino (2), STM32 (2) and ESP8266 (1).

How big is a typical board using the MCP73833?

The median is 52 × 73 mm, and 40% are two-layer designs.

What is the most popular open source board using the MCP73833?

By GitHub stars, PCB business card remake by StuckAtPrototype, with 132 stars.

Can I simulate one of these boards using the MCP73833 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part