002 Sensor PI RS485 board
w4iei·PHOTON·hardware/kicad/002_sensor_board/002_Sensor_PI_RS485 board.kicad_pcb
About the 002 Sensor PI RS485 board
002 Sensor PI RS485 board is an open source RP2040/RP2350 PCB design by w4iei, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 413.7 × 35 mm, with 276 components from 35 distinct parts.
Its main chip is the RP2354_60QFN, from the RP2040/RP2350 family. Other key parts include the TPD4E05U06DQAR, THVD1424RGTR, TPS62A0569ADRLR, VCNT2025X01 and TLA2518IRTER. By type, the board carries 113 resistors, 80 capacitors, 43 ICs, 31 transistors, 3 connectors and 3 inductors.
It belongs with the sensors, audio and displays & leds designs in this gallery.
From the project
Hardware and Software Components of the PHysical Optical Tracking of Notes (PHOTON) system.
KiCad sources for the PHOTON boards. Three designs, all sharing one symbol library (PHOTON.kicadsym, PHOTONModified.kicadsym) and one footprint library (photoncommon.pretty) at the top of hardware/kicad/.
- VCNT2025X01 — reflective optical sensor (Vishay) - TLA2518 — 8-channel SPI ADC (TI) - RP2350 / RP2354 — microcontroller (Raspberry Pi); the RP2354 is the RP2350 with 2 MB of flash in the package, same datasheet - THVD1424 — RS-485 transceiver (TI) - TPS62A0569A — buck regulator (TI) - Waveshare 2.8" capacitive touch LCD — ST7789T3 display controller, CST328 touch controller; the reference…
Main components on the 002 Sensor PI RS485 board
002 Sensor PI RS485 board bill of materials (BOM)
276 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2354_60QFN | RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U1 |
| 1 | TPD4E05U06DQAR | DQA0010A | U4 |
| 1 | THVD1424RGTR | QFN_24RGTR_TEX | U5 |
| 1 | TPS62A0569ADRLR | SOT-563_DRL0006A | U6 |
| 31 | VCNT2025X01 | VCNT2025X01_VIS | U301, U501, U601, U701, U901, U1001, U1101, U1201 +23 |
| 8 | TLA2518IRTER | WQFN16_RTE_TEX | U401, U801, U1301, U1801, U2301, U2801, U3301, U3801 |
| 31 | AO3400A | SOT-23 | Q301, Q501, Q601, Q701, Q901, Q1001, Q1101, Q1201 +23 |
| 1 | ABM8-272-T3 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 2 | SM04B-SRSS-TB(LF)(SN) JST_SH | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1, J2 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | PTVSHC3D7VU | SOD-323_L1.8-W1.3-LS2.5-RD | CR1 |
| 1 | C2286 LED RED | LED_0603_1608Metric | D3 |
| 1 | C14709 FerriteBead | L_0603_1608Metric | FB1 |
| 1 | 3.3UH 3.3uH | L_pol_2016 | L1 |
| 1 | 1UH 1uH | L_1008_2520Metric | L2 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C1 |
| 2 | 4.7UF 4.7uF | C_0402_1005Metric_small_pads | C2, C3 |
| 1 | 22UF 22uF | C_0805_2012Metric | C4 |
| 16 | 100NF 100nF | C_0402_1005Metric | C5, C8, C9, C13, C14, C15, C16, C19 +8 |
| 2 | 4.7UF 4.7uF | C_0402_1005Metric | C6, C7 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 25 | 1UF 1uF | C_0402_1005Metric | C10, C401, C402, C403, C801, C802, C803, C1301 +17 |
| 2 | 15PF 15pF | C_0402_1005Metric | C17, C18 |
| 31 | 1NF 1nF | C_0402_1005Metric | C404, C405, C406, C407, C804, C805, C806, C807 +23 |
| 1 | 0Ω | R_0402_1005Metric | R1 |
| 2 | 5.1kΩ | R_0402_1005Metric | R2, R3 |
| 2 | 120Ω | R_0402_1005Metric | R4, R5 |
| 3 | 33Ω | R_0402_1005Metric | R6, R11, R12 |
| 2 | 1kΩ | R_0402_1005Metric | R7, R18 |
| 2 | 10kΩ | R_0402_1005Metric | R8, R102 |
| 4 | 22Ω | R_0402_1005Metric | R13, R14, R19, R20 |
| 32 | 100kΩ | R_0402_1005Metric | R103, R301, R501, R601, R701, R901, R1001, R1101 +24 |
| 2 | 200kΩ | R_0402_1005Metric | R104, R105 |
| 1 | 51kΩ | R_0402_1005Metric | R106 |
| 31 | 68Ω | R_0402_1005Metric | R302, R502, R602, R702, R902, R1002, R1102, R1202 +23 |
| 31 | 4.7kΩ | R_0402_1005Metric | R303, R503, R603, R703, R903, R1003, R1103, R1203 +23 |
002 Sensor PI RS485 board design files
The KiCad project lives in the w4iei/PHOTON repository on GitHub; these links point at the commit this page was built from.
002 Sensor PI RS485 board: common questions
What microcontroller does the 002 Sensor PI RS485 board use?
The 002 Sensor PI RS485 board is built around the RP2354_60QFN, from the RP2040/RP2350 family.
How big is the 002 Sensor PI RS485 board?
The 002 Sensor PI RS485 board measures 413.7 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 002 Sensor PI RS485 board?
276 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 002 Sensor PI RS485 board design files?
From the w4iei/PHOTON repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 002 Sensor PI RS485 board design in my own project?
Yes, under the terms of its BSD-3-Clause license, which w4iei chose for the repository.
Can I test firmware for the 002 Sensor PI RS485 board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in PHOTON
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k