PHOTON main controller 1d
w4iei·PHOTON·hardware/kicad/001d_main_controller_board_low_profile/PHOTON_main_controller_1d.kicad_pcb
About the PHOTON main controller 1d PCB
PHOTON main controller 1d is an open source RP2040/RP2350 PCB design by w4iei, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 54 × 41.7 mm, with 58 components from 31 distinct parts.
Its main chip is the RP2354_60QFN, from the RP2040/RP2350 family. Other key parts include the TPD4E05U06DQAR, TPS62A0569ADRLR and THVD1424RGTR. By type, the board carries 21 capacitors, 19 resistors, 5 connectors, 4 ICs, 4 diodes and 3 inductors.
It belongs with the audio, displays & leds and power & battery designs in this gallery.
From the project
Hardware and Software Components of the PHysical Optical Tracking of Notes (PHOTON) system.
KiCad sources for the PHOTON boards. Three designs, all sharing one symbol library (PHOTON.kicadsym, PHOTONModified.kicadsym) and one footprint library (photoncommon.pretty) at the top of hardware/kicad/.
- VCNT2025X01 — reflective optical sensor (Vishay) - TLA2518 — 8-channel SPI ADC (TI) - RP2350 / RP2354 — microcontroller (Raspberry Pi); the RP2354 is the RP2350 with 2 MB of flash in the package, same datasheet - THVD1424 — RS-485 transceiver (TI) - TPS62A0569A — buck regulator (TI) - Waveshare 2.8" capacitive touch LCD — ST7789T3 display controller, CST328 touch controller; the reference…
Main components on the PHOTON main controller 1d
PHOTON main controller 1d bill of materials (BOM)
58 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2354_60QFN | RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U1 |
| 1 | TPD4E05U06DQAR | DQA0010A | U4 |
| 1 | TPS62A0569ADRLR | SOT-563_DRL0006A | U5 |
| 1 | THVD1424RGTR | QFN_24RGTR_TEX | U102 |
| 1 | ABM8-272-T3 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | C113206 Micro_SD_Card | TF-015_corrected | J4 |
| 3 | SM04B-SRSS-TB(LF)(SN) JST_SH | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J101, J102, J103 |
| 1 | PTVSHC3D7VU | SOD-323_L1.8-W1.3-LS2.5-RD | CR1 |
| 1 | C2286 LED RED | LED_0603_1608Metric | D3 |
| 3 | C20617921 D_TVS | D_SOD-523 | D10, D11, D12 |
| 1 | C14709 FerriteBead | L_0603_1608Metric | FB1 |
| 1 | 3.3UH 3.3uH | L_pol_2016 | L1 |
| 1 | 1UH 1uH | L_1008_2520Metric | L2 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C1 |
| 2 | 4.7UF 4.7uF | C_0402_1005Metric_small_pads | C2, C3 |
| 1 | 22UF 22uF | C_0805_2012Metric | C4 |
| 11 | 100NF 100nF | C_0402_1005Metric | C5, C8, C13, C14, C15, C16, C19, C20 +3 |
| 2 | 4.7UF 4.7uF | C_0402_1005Metric | C6, C7 |
| 2 | 15PF 15pF | C_0402_1005Metric | C17, C18 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1UF 1uF | C_0402_1005Metric | C104, C106 |
| 1 | 0Ω | R_0402_1005Metric | R1 |
| 2 | 5.1kΩ | R_0402_1005Metric | R2, R3 |
| 4 | 33Ω | R_0402_1005Metric | R6, R11, R12, R102 |
| 2 | 1kΩ | R_0402_1005Metric | R7, R18 |
| 1 | 10kΩ | R_0402_1005Metric | R8 |
| 3 | 22Ω | R_0402_1005Metric | R19, R101, R233 |
| 1 | 100kΩ | R_0402_1005Metric | R103 |
| 2 | 200kΩ | R_0402_1005Metric | R104, R105 |
| 1 | 51kΩ | R_0402_1005Metric | R106 |
| 2 | 2.2kΩ | R_0402_1005Metric | R236, R237 |
PHOTON main controller 1d design files
The KiCad project lives in the w4iei/PHOTON repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/kicad/001d_main_controller_board_low_profile/PHOTON_main_controller_1d.kicad_pcb
- Schematichardware/kicad/001d_main_controller_board_low_profile/PHOTON_main_controller_1d.kicad_sch
- BOMhardware/kicad/001d_main_controller_board_low_profile/production/PHOTON_1D_Main_Controller_A004_Rev_B_bom.csv
PHOTON main controller 1d: common questions
What microcontroller does the PHOTON main controller 1d use?
The PHOTON main controller 1d is built around the RP2354_60QFN, from the RP2040/RP2350 family.
How big is the PHOTON main controller 1d PCB?
The PHOTON main controller 1d measures 54 × 41.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PHOTON main controller 1d?
58 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PHOTON main controller 1d design files?
From the w4iei/PHOTON repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PHOTON main controller 1d design in my own project?
Yes, under the terms of its BSD-3-Clause license, which w4iei chose for the repository.
Can I test firmware for the PHOTON main controller 1d without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in PHOTON
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k