HardLabs

Hikorobo

waiteu-git·hikorobo

Hikorobo PCB layout, top view — open source RP2040/RP2350 board by waiteu-git

About the Hikorobo PCB

Hikorobo is an open source RP2040/RP2350 PCB design by waiteu-git, published on GitHub. It is a 2-layer board measuring 77.5 × 52.1 mm, with 8 components from 8 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the R3008SB, 4053 and SeeeduinoXIAO. By type, the board carries 6 ICs, 1 module and 1 connector.

From the project

KiCadで設計した基板プロジェクト

Main components on the Hikorobo

R3008SB4053SeeeduinoXIAORaspberryPi_Pico

Hikorobo bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
R3008SB
U1
1
~
U2
1
4053
U3
1
SeeeduinoXIAO
U4
1
~
U5
1
~
U6
1
RaspberryPi_Pico
A1
1
PINHD_1X2_MALE
PINHD_1x2_Male
J1

Hikorobo design files

The KiCad project lives in the waiteu-git/hikorobo repository on GitHub; these links point at the commit this page was built from.

Hikorobo: common questions

What microcontroller does the Hikorobo use?

The Hikorobo is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Hikorobo PCB?

The Hikorobo measures 77.5 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hikorobo?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hikorobo design files?

From the waiteu-git/hikorobo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hikorobo design in my own project?

The repository has no license, so all rights stay with waiteu-git. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hikorobo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards