13 open source boards using the 4053
Real designs built with the 4053, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 190 parts
PC-Engine-Duo
Board-Folk
190 partsNo license37 MixSID
hbekel
62.2 × 57.4 mm76 parts2LNo license26AVR/Arduino
Cart
digilogistist
100 × 61.5 mm38 parts2LCC0-1.024AVR/Arduino
Vm101-inout
mirdej
130 × 105 mm233 parts4LNo license23AVR/Arduino
Automata Generator Standard
Sirawit7205
246.4 × 127 mm121 parts2LNo license2AC30
linuxha
173 × 97.5 mm65 parts2LNo license0RP2040/RP2350
Hikorobo
waiteu-git
77.5 × 52.1 mm8 parts2LNo license0NES backup
digilogistist
126 × 59.2 mm15 parts2LCC0-1.024ESP32
Vm129-cpu
mirdej
53.1 × 113.2 mm95 parts4LNo license23AVR/Arduino
Laser-Guided Tracking Servo Breadboard
MVaugn
182.9 × 114.3 mm66 parts2LNo license0STM32
Allcolours analogue
microresearch
163.1 × 128.8 mm240 parts2LNo license15Vm120-output
mirdej
25 × 94 mm75 parts2LNo license23Vm128-preview mux
mirdej
25 × 99.5 mm70 parts2LNo license23
How designs wire the 4053
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 4053 connects to, and the resistors, capacitors and other passives placed on it.
- The INH pin is tied to GND on 7 of 8 designs.
- The VEE pin is tied to GND on 7 of 8 designs.
- The VDD pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INHpin 6 | Connected to: GND 88% | — |
| VEEpin 7 | Connected to: GND 88% | — |
| VSSpin 8 | Connected to: GND 100% | — |
| Apin 11 | Connected to: A connector 38%, 4053 25% |
|
| VDDpin 16 | Connected to: 5V 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MixSID by hbekel, Cart by digilogistist, Vm101-inout by mirdej and Allcolours analogue by microresearch.
The 4053 in open source designs
The gallery holds 13 open source boards using the 4053 from 9 GitHub repositories; a typical one measures about 113 × 98.5 mm and carries around 75 components.
83% are two-layer designs, the rest use four layers or more, and 15% carry an open source license.
The most starred is PC-Engine-Duo by Board-Folk.
Microcontrollers on boards using the 4053
What boards using the 4053 are built for
4053: common questions
Where can I find a 4053 reference design?
Each of the 13 boards on this page is a real design using the 4053. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 4053 INH pin connected?
The INH pin is tied to GND on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 4053.
How is the 4053 VEE pin connected?
The VEE pin is tied to GND on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 4053.
What decoupling capacitors do designs use on the 4053 VDD pin?
The VDD pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 8 open source designs using the 4053.
What parts are used alongside the 4053?
The 4013, 4051 and 4052 appear in the most repositories here.
Which microcontrollers do boards using the 4053 use?
Most are built on AVR/Arduino (4), ESP32 (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the 4053?
The median is 113 × 98.5 mm, and 83% are two-layer designs.
What is the most popular open source board using the 4053?
By GitHub stars, PC-Engine-Duo by Board-Folk, with 37 stars.
Can I simulate one of these boards using the 4053 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.