Button

waiteu-git·osc2026-bomb-defusal-prop·hardware/button/button.kicad_pcb

Button PCB layout, top view — open source RP2040/RP2350 board by waiteu-git

About the Button PCB

Button is an open source RP2040/RP2350 PCB design by waiteu-git, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 14 components from 9 distinct parts.

Its main chip is the Pico 2 H, from the RP2040/RP2350 family. By type, the board carries 7 LEDs, 2 connectors, 2 resistors, 1 IC, 1 switch and 1 capacitor.

Main components on the Button

Pico 2 H

Button bill of materials (BOM)

14 components, 9 distinct parts.

QtyPartRefs
1
Pico 2 H
U1
1
MODULE_JST_XH_4P
J1
1
KEYTOP_LCD_SPI
J2
1
SW_Push
SW1
1
LED (status, green)
LED9
6
WS2812B
NP1, NP2, NP3, NP4, NP5, NP6
1
100uF/16V
C1
1
47
R9
1
330
R10

Button design files

The KiCad project lives in the waiteu-git/osc2026-bomb-defusal-prop repository on GitHub; these links point at the commit this page was built from.

Button: common questions

What microcontroller does the Button use?

The Button is built around the Pico 2 H, from the RP2040/RP2350 family.

How big is the Button PCB?

The Button measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Button?

14 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Button design files?

From the waiteu-git/osc2026-bomb-defusal-prop repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Button design in my own project?

The repository has no license, so all rights stay with waiteu-git. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Button without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in osc2026-bomb-defusal-prop

Similar boards