Complicated wires

waiteu-git·osc2026-bomb-defusal-prop·hardware/complicated_wires/complicated_wires.kicad_pcb

Complicated wires PCB layout, top view — open source RP2040/RP2350 board by waiteu-git

About the Complicated wires PCB

Complicated wires is an open source RP2040/RP2350 PCB design by waiteu-git, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 37 components from 10 distinct parts.

Its main chip is the Pico2, from the RP2040/RP2350 family. By type, the board carries 20 diodes, 5 switches, 2 capacitors, 2 resistors, 1 IC and 1 connector.

Main components on the Complicated wires

Complicated wires bill of materials (BOM)

37 components, 10 distinct parts.

QtyPartRefs
1
Pico2
U1
1
JST_XH_4P
J1
5
WJ141V-2.54-02P
G1, G2, G5, G6, G34
5
WJ141V-2.54-02P
S1, S2, S5, S6, S34
1
OSG58A3131A
LED1
20
SK6812MINI-E
D1, D2, D3, D4, D5, D6, D7, D8 +12
1
100uF/16V
C1
1
0.1uF
C2
1
330
R13
1
47
R14

Complicated wires design files

The KiCad project lives in the waiteu-git/osc2026-bomb-defusal-prop repository on GitHub; these links point at the commit this page was built from.

Complicated wires: common questions

What microcontroller does the Complicated wires use?

The Complicated wires is built around the Pico2, from the RP2040/RP2350 family.

How big is the Complicated wires PCB?

The Complicated wires measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Complicated wires?

37 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Complicated wires design files?

From the waiteu-git/osc2026-bomb-defusal-prop repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Complicated wires design in my own project?

The repository has no license, so all rights stay with waiteu-git. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Complicated wires without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in osc2026-bomb-defusal-prop

Similar boards