Timer
waiteu-git·osc2026-bomb-defusal-prop·hardware/timer/timer.kicad_pcb
About the Timer PCB
Timer is an open source RP2040/RP2350 PCB design by waiteu-git, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 35 components from 17 distinct parts.
Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the TM1637 and AE-TPS63802. By type, the board carries 8 connectors, 6 fuses, 5 resistors, 4 ICs, 4 diodes and 3 capacitors.
Main components on the Timer
Timer bill of materials (BOM)
35 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Pico | RPi_Pico_TH_Headers | U1, U3 |
| 1 | TM1637 | DIP-20_W7.62mm | U2 |
| 1 | AE-TPS63802 | AE-TPS63802 | U4 |
| 1 | IRLML6402 | SOT-23 | Q1 |
| 6 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1, J2, J3, J4, J5, J7 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | Conn_01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 4 | A-551SRD | A-551SRD | DS1, DS2, DS3, DS4 |
| 5 | Polyfuse_Small | MF-RX030_Radial_P5.10mm | F1, F2, F3, F4, F5 |
| 1 | Polyfuse_Small | MF-R185_Radial_P5.10mm | F6 |
| 2 | LED | LED_D3.0mm | D1, D2 |
| 2 | LED | LED_D5.0mm | D3, D4 |
| 1 | C | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | C_Polarized | CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | C_Polarized | CP_Radial_D8.0mm_P3.50mm | C3 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 3 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3, R4, R5 |
Timer design files
The KiCad project lives in the waiteu-git/osc2026-bomb-defusal-prop repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/timer/timer.kicad_pcb
- Schematichardware/timer/timer.kicad_sch
Timer: common questions
What microcontroller does the Timer use?
The Timer is built around the Pico, from the RP2040/RP2350 family.
How big is the Timer PCB?
The Timer measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Timer?
35 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Timer design files?
From the waiteu-git/osc2026-bomb-defusal-prop repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Timer design in my own project?
The repository has no license, so all rights stay with waiteu-git. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Timer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in osc2026-bomb-defusal-prop
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k