Four button
waiteu-git·osc2026-bomb-defusal-prop·hardware/four_button/four_button.kicad_pcb
About the Four button PCB
Four button is an open source RP2040/RP2350 PCB design by waiteu-git, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 20 components from 13 distinct parts.
Its main chip is the Pico 2 H, from the RP2040/RP2350 family. By type, the board carries 9 switches, 5 diodes, 2 capacitors, 2 resistors, 1 IC and 1 connector.
Main components on the Four button
Four button bill of materials (BOM)
20 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pico 2 H | RPi_Pico_TH_Headers | U1 |
| 1 | MODULE_JST_XH_4P | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 8 | Kailh_socket_MX | Kailh_socket_MX | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 1 | Mode select | SW_Slide_2P | SW9 |
| 1 | WS2812B Red | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | WS2812B Blue | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 1 | WS2812B Green | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3 |
| 1 | WS2812B Yellow | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4 |
| 1 | LED status green OSG58A3131A | LED_D3.0mm | D5 |
| 1 | 100uF/16V | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 100nF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C2 |
| 1 | 47 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
Four button design files
The KiCad project lives in the waiteu-git/osc2026-bomb-defusal-prop repository on GitHub; these links point at the commit this page was built from.
Four button: common questions
What microcontroller does the Four button use?
The Four button is built around the Pico 2 H, from the RP2040/RP2350 family.
How big is the Four button PCB?
The Four button measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Four button?
20 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Four button design files?
From the waiteu-git/osc2026-bomb-defusal-prop repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Four button design in my own project?
The repository has no license, so all rights stay with waiteu-git. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Four button without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in osc2026-bomb-defusal-prop
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k