Controls-2025-electrical
waterloo-rocketry·controls-2025-electrical·motor_control_board/motor_control_board.kicad_pcb
About the Controls-2025-electrical PCB
Controls-2025-electrical is an open source PIC PCB design by waterloo-rocketry, published on GitHub. It is a 4-layer board measuring 50.2 × 40 mm, with 82 components from 37 distinct parts.
Its main chip is the PIC18F26K83, from the PIC family. Other key parts include the CPC1117N, MCP2562, SN74LVC1G14DBV, INA232AIDDFR and UA78M05IDCYR. By type, the board carries 27 resistors, 21 capacitors, 9 ICs, 9 diodes, 7 connectors and 4 test points.
From the project
2025 Controls Electrical
2025 Controls Electrical Design ===============================
Main components on the Controls-2025-electrical
Controls-2025-electrical bill of materials (BOM)
82 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CPC1117N | SOIC254P610X218-4N | U1 |
| 2 | MCP2562 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 2 | PIC18F26K83 | SSOP-28_5.3x10.2mm_P0.65mm | U3, U5 |
| 1 | SN74LVC1G14DBV | SOT-23-5 | U6 |
| 1 | INA232AIDDFR | SOT65P280X110-8N | U7 |
| 1 | UA78M05IDCYR | SOT230P700X180-4N | U8 |
| 1 | ECH8420-TL-H | OnSemi_ECH8 | U9 |
| 2 | 12MHZ 12MHz | Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | X1, X2 |
| 2 | CONN_01X05_FEMALE Conn_01x05_Female | PinSocket_5x2.54_SMD_90deg_952-3198-1-ND | J1, J2 |
| 1 | HARWIN_G125-MG10605M4P Harwin_G125-MG10605M4P | connector_Harwin_G125–MG10605M4P | J3 |
| 1 | HARWIN_M80-5000000M5-02-333-00-000 Harwin_M80-5000000M5-02-333-00-000 | TE_2-1437667-4 | J4 |
| 1 | HARWIN_M80-5400642 Harwin_M80-5400642 | HARWIN_M80-5400642 | J5 |
| 2 | HARWIN_M80-8510442 Harwin_M80-8510442 | HARWIN_M80-8510442 | J6, J7 |
| 1 | Polyfuse 10A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | Polyfuse 1A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2 |
| 1 | Polyfuse 0.5A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F3 |
| 1 | 5V | TestPoint_Keystone_5000-5004_Miniature | TP2 |
| 1 | PWM_MCU | TestPoint_Keystone_5000-5004_Miniature | TP3 |
| 1 | PWM_SERVO | TestPoint_Keystone_5000-5004_Miniature | TP4 |
| 1 | PWM_FS | TestPoint_Keystone_5000-5004_Miniature | TP5 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | PMEG2010ER | Nexperia_CFP3_SOD-123W | D1, D2, D3 |
| 1 | STPS5H100AFY | D_SOD-128 | D4 |
| 1 | GREEN | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D5 |
| 2 | RED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D6, D9 |
| 1 | BLUE | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D7 |
| 1 | WHITE | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D8 |
| 5 | 22U 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C18, C19, C20, C21 |
| 2 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7 |
| 4 | 26P 26p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C8, C9 |
| 9 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C10, C11, C12, C13, C14, C16 +1 |
| 1 | 0.33U 0.33u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 2 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 2 | 4.3M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5 |
| 11 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R7, R8, R10, R12, R13, R15, R16 +3 |
| 2 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R11 |
| 9 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R14, R17, R18, R20, R21, R23, R25 +1 |
| 1 | 13M 13m | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R22 |
Controls-2025-electrical design files
The KiCad project lives in the waterloo-rocketry/controls-2025-electrical repository on GitHub; these links point at the commit this page was built from.
Controls-2025-electrical: common questions
What microcontroller does the Controls-2025-electrical use?
The Controls-2025-electrical is built around the PIC18F26K83, from the PIC family.
How big is the Controls-2025-electrical PCB?
The Controls-2025-electrical measures 50.2 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Controls-2025-electrical?
82 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Controls-2025-electrical design files?
From the waterloo-rocketry/controls-2025-electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Controls-2025-electrical design in my own project?
The repository has no license, so all rights stay with waterloo-rocketry. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Controls-2025-electrical without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379