6 open source boards using the UA78M05IDCYR
Real designs built with the UA78M05IDCYR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SignalSlinger
OpenARDF
94.1 × 59.1 mm110 parts4LMIT7Qsd2
Greg-R
100 × 75 mm68 parts2LGPL-3.04Qse2
Greg-R
100 × 75 mm80 parts2LGPL-3.01PIC
Controls-2025-electrical
waterloo-rocketry
50.2 × 40 mm82 parts4LNo license0NXP
Digimuser Board
piercehowell
60.2 × 38.7 mm71 parts2LMIT0PIC
Remote arming
waterloo-rocketry
68.9 × 41.5 mm61 parts4LGPL-3.015
How designs wire the UA78M05IDCYR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the UA78M05IDCYR connects to, and the resistors, capacitors and other passives placed on it.
- The OUTPUT pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF).
- The COMMON pin is tied to GND on 6 of 6 designs.
- The INPUT pin is tied to 12V on 4 of 6 designs (a signal on 2).
- The COMMON__1 pin is tied to GND on 4 of 4 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INPUTpin 1 | Connected to: 12V 67% · a signal 33% | — |
| COMMONpin 2 | Connected to: GND 100% | — |
| OUTPUTpin 3 | Connected to: 5V 50% · a signal 50% |
|
| COMMON__1pin 4 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Remote arming by waterloo-rocketry, SignalSlinger by OpenARDF, Qsd2 by Greg-R and Qse2 by Greg-R.
The UA78M05IDCYR in open source designs
The gallery holds 6 open source boards using the UA78M05IDCYR from 6 GitHub repositories; a typical one measures about 81.5 × 50.3 mm and carries around 76 components.
50% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is Remote arming by waterloo-rocketry.
Parts used alongside the UA78M05IDCYR
What boards using the UA78M05IDCYR are built for
UA78M05IDCYR: common questions
Where can I find a UA78M05IDCYR reference design?
Each of the 6 boards on this page is a real design using the UA78M05IDCYR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the UA78M05IDCYR OUTPUT pin connected?
The OUTPUT pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the UA78M05IDCYR.
How is the UA78M05IDCYR COMMON pin connected?
The COMMON pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the UA78M05IDCYR.
How is the UA78M05IDCYR INPUT pin connected?
The INPUT pin is tied to 12V on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the UA78M05IDCYR.
What parts are used alongside the UA78M05IDCYR?
The SN74LVC1G14DBV, AP7343, MCP2562, PIC18F26K83 and SN74CBT3253 appear in the most repositories here.
Which microcontrollers do boards using the UA78M05IDCYR use?
Most are built on PIC (2) and NXP (1).
How big is a typical board using the UA78M05IDCYR?
The median is 81.5 × 50.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the UA78M05IDCYR?
By GitHub stars, Remote arming by waterloo-rocketry, with 15 stars.
Can I simulate one of these boards using the UA78M05IDCYR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.