Strain gauges rtr
About the Strain gauges rtr PCB
Strain gauges rtr is an open source PCB design by waterloo-rocketry, published on GitHub. It is a 2-layer board measuring 88.9 × 44.5 mm, with 37 components from 19 distinct parts.
Other key parts include the TL780-15, LT1460-10 and INA826. By type, the board carries 13 resistors, 8 connectors, 8 capacitors, 6 ICs, 1 transistor and 1 fuse.
It belongs with the sensors designs in this gallery.
From the project
Data Acquisition schematics, boards, datasheets, docs, and software
Work in progress repo for the next iteration of the WR DAQ. This revision focuses on modularity and extensibility, with the ability to easily add more sensors as required. Schematics of the last revision are in old/. The new system supports the following: Strain gauges 12V pressure transducers thermistors/RTDs based on need SD card logging using an Arduino * Logging to an NI DAQ instrumentation module
Main components on the Strain gauges rtr
Strain gauges rtr bill of materials (BOM)
37 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL780-15 | TO-220-3_Vertical | U1 |
| 1 | LT1460-10 | TO-92_Inline_Narrow_Oval | U2 |
| 4 | INA826 | SOIC-8_3.9x4.9mm_Pitch1.27mm_HandSoldering | U3, U4, U5, U6 |
| 1 | 2N3096 | TO-92_Inline_Narrow_Oval | Q1 |
| 2 | Conn_01x03 | PhoenixContact_MCV-G_03x3.50mm_Vertical | J1, J2 |
| 1 | Conn_01x08 | PhoenixContact_MCV-G_08x3.50mm_Vertical | J3 |
| 4 | Conn_01x04 | PhoenixContact_MCV-G_04x3.50mm_Vertical | J4, J5, J6, J7 |
| 1 | CONN_01X02 | PhoenixContact_MCV-G_02x3.50mm_Vertical | P1 |
| 1 | Fuse | Fuse_1206_3216Metric_Pad1.24x1.80mm_HandSolder | F1 |
| 1 | 47uF | CP_Radial_Tantal_D6.0mm_P2.50mm | C1 |
| 1 | 330 nF | C_0805_HandSoldering | C2 |
| 1 | 220 nF | C_0805_HandSoldering | C3 |
| 1 | 2uF | CP_Radial_Tantal_D5.0mm_P2.50mm | C4 |
| 4 | 0.1uF | C_0805_HandSoldering | C5, C6, C7, C8 |
| 1 | 220 | R_0805_HandSoldering | R1 |
| 1 | 20K | R_0805_HandSoldering | R2 |
| 3 | 10K | R_0805_HandSoldering | R3, R4, R5 |
| 4 | R | R_0805_HandSoldering | R6, R8, R10, R12 |
| 4 | 0 | R_0805_HandSoldering | R7, R9, R11, R13 |
Strain gauges rtr design files
The KiCad project lives in the waterloo-rocketry/daq repository on GitHub; these links point at the commit this page was built from.
Strain gauges rtr: common questions
How big is the Strain gauges rtr PCB?
The Strain gauges rtr measures 88.9 × 44.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Strain gauges rtr?
37 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Strain gauges rtr design files?
From the waterloo-rocketry/daq repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Strain gauges rtr design in my own project?
The repository has no license, so all rights stay with waterloo-rocketry. Use it as a reference, and ask the author before reusing the design.
More boards in daq
PICThermocouple board
73.9 × 56.6 mm59 parts2LNo license5
PICI2c pancake
74.9 × 45 mm56 parts4LNo license5
DAQ Patch Panel
32 × 114.4 mm43 parts2LNo license5
Strain gauges
97.8 × 54.6 mm37 parts2LNo license5
Power board
68.5 × 36.5 mm29 parts2LNo license5
Thermistors
92.7 × 35.6 mm21 parts2LNo license5
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956