Buck converter 3v
waxters-osu·senior_design_low_noise_visibility_drone·Hardware Design Files/power_electronics/buck_converter_3v/buck_converter_3v.kicad_pcb
About the Buck converter 3v PCB
Buck converter 3v is an open source PCB design by waxters-osu, published on GitHub. It is a 2-layer board measuring 34.8 × 33.8 mm, with 22 components from 13 distinct parts.
By type, the board carries 2 connectors and 1 inductor.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
Low-noise & low-visibility drone senior design project.
This folder is for all hardware design files.
Buck converter 3v bill of materials (BOM)
22 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_01X08_PIN Conn_01x02 | 2-terminal-screw-connector-691137710002 | J1, J2 |
| 1 | 0.1 | C_0805_2012Metric | Cboot1 |
| 1 | 15p | C_0805_2012Metric | Cff1 |
| 2 | 10u | C_1206_3216Metric | Cin1, Cin2 |
| 2 | 0.47u | C_0603_1608Metric | Cin_hf1, Cin_hf2 |
| 6 | 22u | C_0805_2012Metric | Cout1, Cout2, Cout3, Cout4, Cout5, Cout6 |
| 1 | 150u | CP_Radial_D5.0mm_P2.00mm | Cout7 |
| 1 | 1u | C_0805_2012Metric | Cvcc1 |
| 1 | LM61495QRPHRQ1 | CONV_LM61495QRPHRQ1 | PS1 |
| 1 | 25.5k | R_0805_2012Metric | Rfbb1 |
| 2 | 100k | R_0805_2012Metric | Rfbt1, Rreset1 |
| 1 | 4.99k | R_0805_2012Metric | Rff1 |
| 1 | 3.3u | TMPC 1004H-3R3MG-D | L1 |
Buck converter 3v design files
The KiCad project lives in the waxters-osu/senior_design_low_noise_visibility_drone repository on GitHub; these links point at the commit this page was built from.
Buck converter 3v: common questions
How big is the Buck converter 3v PCB?
The Buck converter 3v measures 34.8 × 33.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buck converter 3v?
22 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Buck converter 3v design files?
From the waxters-osu/senior_design_low_noise_visibility_drone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Buck converter 3v design in my own project?
The repository has no license, so all rights stay with waxters-osu. Use it as a reference, and ask the author before reusing the design.
More boards in senior_design_low_noise_visibility_drone
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k