SPEAKER
waxters-osu·senior_design_low_noise_visibility_drone·Hardware Design Files/Speaker/Speaker.kicad_pcb
About the SPEAKER PCB
SPEAKER is an open source PCB design by waxters-osu, published on GitHub. It is a 2-layer board measuring 40.2 × 36.1 mm, with 22 components from 11 distinct parts.
Other key parts include the LMV358IDR, MAX5187BEEG+ and PAM8304. By type, the board carries 9 resistors, 5 ICs, 3 connectors, 3 capacitors and 2 inductors.
It belongs with the audio and robotics & motion designs in this gallery.
From the project
Low-noise & low-visibility drone senior design project.
This folder contains all hardware files pertaining to the speaker
Main components on the SPEAKER
SPEAKER bill of materials (BOM)
22 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMV358IDR | D8-M | U1 |
| 1 | MAX5187BEEG+ | 21-0055H_24-M | U2 |
| 3 | PAM8304 | SOP65P490X110-8N | U3, U4, U5 |
| 1 | CONN_01X08_PIN D7-D0 | CONN_1945151_PXC | J1 |
| 1 | CONN_01X08_PIN CLK DAC1 DAC2 PRE_AMP SPKR+ SPKR- 1.2V CS/ | CONN_1945151_PXC | J2 |
| 1 | SCREW_TERMINAL_01X07 SPKR- SPKR+ 3V3 GND 5V D3V3 DGND | CUI_TB001-500-07BE | J3 |
| 2 | FerriteBead | IND_BLM15_0402_MUR-M | FB1, FB2 |
| 1 | 0.1U 0.1u | CAP_CL10_SAM-M | C1 |
| 2 | 4.7U 4.7u | CAP_CL10_SAM-M | C2, C3 |
| 2 | 70K | RESC2012X60N | R1, R6 |
| 7 | 10K | RESC2012X60N | R2, R3, R4, R5, R7, R8, R9 |
SPEAKER design files
The KiCad project lives in the waxters-osu/senior_design_low_noise_visibility_drone repository on GitHub; these links point at the commit this page was built from.
SPEAKER: common questions
How big is the SPEAKER PCB?
The SPEAKER measures 40.2 × 36.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SPEAKER?
22 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SPEAKER design files?
From the waxters-osu/senior_design_low_noise_visibility_drone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SPEAKER design in my own project?
The repository has no license, so all rights stay with waxters-osu. Use it as a reference, and ask the author before reusing the design.
More boards in senior_design_low_noise_visibility_drone
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979