MICROPHONE
waxters-osu·senior_design_low_noise_visibility_drone·Hardware Design Files/Microphone/Microphone.kicad_pcb
About the MICROPHONE PCB
MICROPHONE is an open source PCB design by waxters-osu, published on GitHub. It is a 2-layer board measuring 43.1 × 21.6 mm, with 22 components from 21 distinct parts.
Other key parts include the LMV358IDR. By type, the board carries 9 resistors, 6 connectors, 5 capacitors, 1 IC and 1 microphone.
It belongs with the robotics & motion designs in this gallery.
From the project
Low-noise & low-visibility drone senior design project.
Main components on the MICROPHONE
MICROPHONE bill of materials (BOM)
22 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMV358IDR MAX4466 | Mic_Op_Amp | U1 |
| 1 | CONN_01X08_PIN TP1 | ADAM-TECH_PH1-01-UA | J1 |
| 1 | CONN_01X08_PIN TP2 | ADAM-TECH_PH1-01-UA | J2 |
| 1 | SCREW_TERMINAL_01X07 TP3 | ADAM-TECH_PH1-01-UA | J3 |
| 1 | TP4 | ADAM-TECH_PH1-01-UA | J4 |
| 1 | TP5 | ADAM-TECH_PH1-01-UA | J5 |
| 1 | VDD GND MIC_OUT | CONN_1984976_PXC | J6 |
| 1 | MIC | CMA_CUI_9P7X9P7_CUD | MK1 |
| 1 | 0.1U 330u | CAPC3225X280N | C1 |
| 1 | 4.7U 12n | CAPC0603X33N | C2 |
| 1 | 4.7U 1u | CAPC0603X33N | C3 |
| 1 | 100p | CAPC0603X33N | C4 |
| 1 | 1p | CAPC0603X33N | C5 |
| 1 | 70K 1k | RESC2012X60N | R1 |
| 2 | 10K 100 | RESC2012X60N | R2, R4 |
| 1 | 10K 1k | RESC2012X60N | R3 |
| 1 | 10K 1M | RESC2012X60N | R5 |
| 1 | 70K 1.8M | RESC2012X60N | R6 |
| 1 | 10K | RESC2012X60N | R7 |
| 1 | 10K 499k | RESC2012X60N | R8 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K 7.87M | RES_R1206_ROM-M | R9 |
MICROPHONE design files
The KiCad project lives in the waxters-osu/senior_design_low_noise_visibility_drone repository on GitHub; these links point at the commit this page was built from.
MICROPHONE: common questions
How big is the MICROPHONE PCB?
The MICROPHONE measures 43.1 × 21.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MICROPHONE?
22 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MICROPHONE design files?
From the waxters-osu/senior_design_low_noise_visibility_drone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MICROPHONE design in my own project?
The repository has no license, so all rights stay with waxters-osu. Use it as a reference, and ask the author before reusing the design.
More boards in senior_design_low_noise_visibility_drone
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979