Iot telemetry scale
wbommel·iot-telemetry-scale-pcb
About the Iot telemetry scale PCB
Iot telemetry scale is an open source ESP8266 PCB design by wbommel, published on GitHub under the MIT license. It is a 2-layer board measuring 101.2 × 70.8 mm, with 19 components from 13 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the L78L33 and XFW-HX711. By type, the board carries 7 resistors, 4 switches, 3 ICs, 3 connectors and 2 capacitors.
It belongs with the iot & wireless designs in this gallery.
From the project
This repository contains the KiCAD design files for the custom PCB used in the IoT Telemetry Scale project – a modular, networked weighing solution originally built to monitor the weights of budgies in an aviary. 🐦📡
This repository contains the KiCAD design files for the custom PCB used in the IoT Telemetry Scale project – a modular, networked weighing solution originally built to monitor the weights of budgies in an aviary. 🐦📡
The PCB is built around the ESP8266 (ESP12-E/F) and the HX711 load cell amplifier, aiming to be compact, reliable, and easily integrated with MQTT-based telemetry systems.
Main components on the Iot telemetry scale
Iot telemetry scale bill of materials (BOM)
19 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L78L33 | TO-92L_Inline_Wide | U1 |
| 1 | ESP-12E | ESP-12E | U2 |
| 1 | XFW-HX711 | XFW-HX711 | U3 |
| 1 | USB_B_Micro | USB_B_Micro_Breakout | J1 |
| 1 | Prog.-Conn. | PinHeader_2x02_P2.54mm_Vertical | J2 |
| 1 | Bridge_Conn | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Reset | SW_PUSH_6mm | SW1 |
| 1 | Flash | SW_PUSH_6mm | SW2 |
| 1 | Tare | SW_PUSH_6mm | SW3 |
| 1 | Calibrate | SW_PUSH_6mm | SW4 |
| 1 | 100n | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 330n | C_Rect_L9.0mm_W2.5mm_P7.50mm_MKT | C2 |
| 7 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
Iot telemetry scale design files
The KiCad project lives in the wbommel/iot-telemetry-scale-pcb repository on GitHub; these links point at the commit this page was built from.
Iot telemetry scale: common questions
What microcontroller does the Iot telemetry scale use?
The Iot telemetry scale is built around the ESP-12E, from the ESP8266 family.
How big is the Iot telemetry scale PCB?
The Iot telemetry scale measures 101.2 × 70.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Iot telemetry scale?
19 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Iot telemetry scale design files?
From the wbommel/iot-telemetry-scale-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Iot telemetry scale design in my own project?
Yes, under the terms of its MIT license, which wbommel chose for the repository.
Can I test firmware for the Iot telemetry scale without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398