4 open source boards using the L78L33

Real designs built with the L78L33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The L78L33 in open source designs

The gallery holds 4 open source boards using the L78L33 from 4 GitHub repositories; a typical one measures about 92.1 × 69 mm and carries around 42 components.

100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is CheapMesh by joyel24.

Microcontrollers on boards using the L78L33

What boards using the L78L33 are built for

L78L33: common questions

Where can I find a L78L33 reference design?

Each of the 4 boards on this page is a real design using the L78L33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the L78L33 use?

Most are built on AVR/Arduino (1), ESP8266 (1) and STM32 (1).

How big is a typical board using the L78L33?

The median is 92.1 × 69 mm, and 100% are two-layer designs.

What is the most popular open source board using the L78L33?

By GitHub stars, CheapMesh by joyel24, with 24 stars.

Can I simulate one of these boards using the L78L33 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part