Fm1-midi dongle.

wero1414·fm1-midi-dongle.

Fm1-midi dongle. PCB layout, top view — open source WCH CH32/CH55x board by wero1414

About the Fm1-midi dongle. PCB

Fm1-midi dongle. is an open source WCH CH32/CH55x PCB design by wero1414, published on GitHub. It is a 4-layer board measuring 20 × 26 mm, with 25 components from 20 distinct parts.

Its main chip is the null, from the WCH CH32/CH55x family. Other key parts include the XC6206P332MR, SY6280AAC and H11L1SM. By type, the board carries 10 resistors, 5 capacitors, 4 ICs, 4 connectors and 2 diodes.

It belongs with the audio designs in this gallery.

From the project

A small stick that plugs into the M-VAVE FM-1's USB-C port and gives it a TRS MIDI OUT and an isolated TRS MIDI IN. The FM-1 is a USB MIDI device, so the dongle is a USB host built on the WCH CH32X035G8U6 (the cheapest WCH part with a full-speed USB host). It works with any FM-1

A small stick that plugs into the M-VAVE FM-1's USB-C port and gives it a TRS MIDI OUT and an isolated TRS MIDI IN. The FM-1 is a USB MIDI device, so the dongle is a USB host built on the WCH CH32X035G8U6 (the cheapest WCH part with a full-speed USB host). It works with any FM-1 firmware that sends MIDI over USB: Melodee, SLOOP, Felucca, Hortator, stock.

- DESIGN.md: the locked design, verified pins, open items, firmware plan, cost. - BOM.csv: parts with LCSC numbers and a Verified column. - fm1-midi-dongle.kicadsch / .kicadpro: KiCad 10 schematic (ERC clean). Generated by tools/gensch.py. -…

Main components on the Fm1-midi dongle.

Fm1-midi dongle. bill of materials (BOM)

25 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
null
CH32X035G8U6
null
U1
1
XC6206P332MR
U2
1
SY6280AAC
U3
1
H11L1SM
U4
1
TYPE-C 24P-GTJB 040
J1
1
TYPE-C-31-M-12
J2
2
PJ-320D
J3, J4
1
1N4148W
D1
1
19-217/GHC-YR1S2/3T
LED green 0603
D2
3
CL10A105KB8NNNC
1u
C1, C2, C3
2
CC0603KRX7R9BB104
100n
C4, C5
1
0603WAF5602T5E
56k
R1
2
0603WAF5101T5E
5.1k
R2, R3
1
0603WAF6801T5E
6.8k
R4
1
0603WAF100JT5E
10
R7
1
0603WAF330JT5E
33
R8
1
0603WAF2200T5E
220
R9
1
0603WAF1002T5E
10k
R10
1
0603WAF1001T5E
1k
R11
1
0603WAF1003T5E
100k
R12

Fm1-midi dongle. design files

The KiCad project lives in the wero1414/fm1-midi-dongle. repository on GitHub; these links point at the commit this page was built from.

Fm1-midi dongle.: common questions

What microcontroller does the Fm1-midi dongle. use?

The Fm1-midi dongle. is built around the null, from the WCH CH32/CH55x family.

How big is the Fm1-midi dongle. PCB?

The Fm1-midi dongle. measures 20 × 26 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the Fm1-midi dongle.?

25 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fm1-midi dongle. design files?

From the wero1414/fm1-midi-dongle. repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fm1-midi dongle. design in my own project?

The repository has no license, so all rights stay with wero1414. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fm1-midi dongle. without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.

Similar boards