9 open source boards using the H11L1SM
Real designs built with the H11L1SM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
MIST.1010
UzixLS
100 × 100 mm259 parts2LMIT43ESP32
T dsp desktop pro
t-dsp
120 × 100 mm135 parts8LCC-BY-NC-4.06ESP32
T dsp core
t-dsp
100 × 100 mm131 parts4LCC-BY-NC-4.06ValTronix-VTM0001-EnergyMonitor
vmarzlin
100 × 100 mm111 parts2LGPL-3.01STM32
Mseq
MF-Room
135.3 × 78.4 mm87 parts2LCERN-OHL-S-2.01WCH CH32/CH55x
Fm1-midi dongle.
wero1414
20 × 26 mm25 parts4LNo license1Riscv challenge
FrankBuss
25.4 × 25.4 mm10 parts2LBSD-2-Clause1ESP32
Jlcpcb 1x1
t-dsp
134 × 114 mm105 parts8LCC-BY-NC-4.06ESP32
Jlcpcb 1x1
t-dsp
134 × 114 mm105 parts8LCC-BY-NC-4.06
How designs wire the H11L1SM
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the H11L1SM connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a series resistor on 6 of 6 designs, most often 220 Ω (then 820 Ω).
- Pin 6 has a decoupling capacitor on 6 of 6 designs, most often 100 nF.
- Pin 3 is left unconnected on 6 of 6 designs.
- Pin 4 has a pull-up to 3.3V on 4 of 6 designs, most often 4.7 kΩ (then 330 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| Pin 3 | Connected to: Not connected 100% | — |
| Pin 4 | Connected to: 74HCT2G17GW,125 33%, the microcontroller 33% |
|
| Pin 5 | Connected to: GND 67% · a signal 33% |
|
| Pin 6 | Connected to: 3.3V 67% · a signal 33% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MIST.1010 by UzixLS, T dsp core by t-dsp, T dsp desktop pro by t-dsp and Mseq pcb by MF-Room.
The H11L1SM in open source designs
The gallery holds 9 open source boards using the H11L1SM from 7 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 105 components.
56% use four copper layers or more, and 44% carry an open source license.
The most starred is MIST.1010 by UzixLS.
Parts used alongside the H11L1SM
Microcontrollers on boards using the H11L1SM
What boards using the H11L1SM are built for
H11L1SM: common questions
Where can I find a H11L1SM reference design?
Each of the 9 boards on this page is a real design using the H11L1SM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the H11L1SM pin 1?
Pin 1 has a series resistor on 6 of 6 designs, most often 220 Ω (then 820 Ω). Counted from the KiCad layouts of 6 open source designs using the H11L1SM.
What decoupling capacitors do designs use on the H11L1SM pin 6?
Pin 6 has a decoupling capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the H11L1SM.
How is the H11L1SM pin 3 connected?
Pin 3 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the H11L1SM.
What parts are used alongside the H11L1SM?
The 74HCT2G125DC,125, 74HCT2G17GW,125, AMS1117-3.3, Dual Buffer - SN74LVC2G125DCTR and Logic Level Shifter - 74HCT2G125DC,125 appear in the most repositories here.
Which microcontrollers do boards using the H11L1SM use?
Most are built on ESP32 (4), WCH CH32/CH55x (1), ESP8266 (1) and STM32 (1).
How big is a typical board using the H11L1SM?
The median is 100 × 100 mm, and 44% are two-layer designs.
What is the most popular open source board using the H11L1SM?
By GitHub stars, MIST.1010 by UzixLS, with 43 stars.
Can I simulate one of these boards using the H11L1SM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.