Imac g3 slot loading J22 adapter board
About the Imac g3 slot loading J22 adapter board
Imac g3 slot loading J22 adapter board is an open source PCB design by wickerwaka, published on GitHub under the LGPL-3.0 license. It is a 2-layer board measuring 59 × 28.5 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 connectors and 2 resistors.
It belongs with the audio designs in this gallery.
From the project
A MiSTer FPGA inside of an iMac G3
The iMacSTer is an early 2000's Apple iMac G3 with a MiSTer FPGA multisystem emulator inside of it. It is intended to be a non-destructive modification so the iMac can be returned to it's original state if desired. The mainboard, drives and IO panel are removed and replace by custom hardware, but no cuts are made to the chassis and the new hardware connects to existing internal connections without the need for any soldering. That being said, I can make no guarantees about the long term implications of these modifications. The speakers are being driven by a different amplifier than they were…
Imac g3 slot loading J22 adapter board bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x13_Odd_Even | PinHeader_2x13_P2.54mm_Vertical | J1 |
| 1 | AC Power | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 2 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
Imac g3 slot loading J22 adapter board design files
The KiCad project lives in the wickerwaka/iMacSTer repository on GitHub; these links point at the commit this page was built from.
Imac g3 slot loading J22 adapter board: common questions
How big is the Imac g3 slot loading J22 adapter board?
The Imac g3 slot loading J22 adapter board measures 59 × 28.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Imac g3 slot loading J22 adapter board?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Imac g3 slot loading J22 adapter board design files?
From the wickerwaka/iMacSTer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Imac g3 slot loading J22 adapter board design in my own project?
Yes, under the terms of its LGPL-3.0 license, which wickerwaka chose for the repository.
More boards in iMacSTer
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687