R.A.W.R.
WiktorKociuba·R.A.W.R.·R.A.W.R/R.A.W.R.kicad_sch
About the R.A.W.R. PCB
R.A.W.R. is an open source Raspberry Pi PCB design by WiktorKociuba, published on GitHub. It is a board, with 165 components from 81 distinct parts.
Its main chip is the RP2354A, from the Raspberry Pi family. Other key parts include the PSA4-5043+, ADE-1+, BQ24075QRGTRQ1, TPS61088RHLR and TPS7A4700RGWT. By type, the board carries 73 capacitors, 54 resistors, 9 ICs, 8 inductors, 4 connectors and 4 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
Reliable Airband Wireless Receiver
Main components on the R.A.W.R.
R.A.W.R. bill of materials (BOM)
165 components, 81 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PSA4-5043+ | PSA45043 | IC1 |
| 1 | ADE-1+ | ADE1 | IC2 |
| 1 | BQ24075QRGTRQ1 | QFN50P300X300X100-17N-D | IC3 |
| 1 | TPS61088RHLR | TPS61088RHLR | IC4 |
| 1 | TPS7A4700RGWT | TPS7A4700RGWT | IC5 |
| 1 | TPS7A2650DRVR | TPS7A2650DRVR | IC6 |
| 1 | LM358 | DIP794W53P254L959H508Q8N | U1 |
| 1 | LM386 | SOIC127P600X175-8N | U2 |
| 1 | RP2354A | QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U3 |
| 2 | MMBT3904 | SOT-23 | Q1, Q2 |
| 1 | Si5351A-B-GT | MSOP-10_3x3mm_P0.5mm | Y1 |
| 1 | 25MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y2 |
| 1 | ABM8-272-T3 | ABM8272T3 | Y3 |
| 1 | BNC connector | BNC_Amphenol_031-6575_Horizontal | J1 |
| 1 | SM03B-SRSS-TB(LF)(SN) | SM03BSRSSTBLFSN | J2 |
| 1 | 0.96 inch screen | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_Amphenol_12401610E4-2A | J4 |
| 1 | 18650 Li-Ion | Texas_RGE0024H_VQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | BT1 |
| 1 | Speaker | PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | TPS63020DSJT | TPS63020DSJT | PS1 |
Show 61 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | PTV09A2020FA104 | RV1 |
| 1 | JS102011SAQN | JS102011SAQN | S1 |
| 2 | 434133025816 | 434133025816 | SW1, SW2 |
| 1 | RotaryEncoder_Switch | PEC11R4220FS0024 | SW3 |
| 1 | 10k | PinHeader_1x02_P2.54mm_Vertical | TH1 |
| 1 | BAT43W | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | GREEN | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | RED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 2 | 68n | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1, L2 |
| 1 | 10u | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L3 |
| 1 | 3.3u | AOTAB201610S3R3101T | L4 |
| 2 | 2.2u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | L5, L6 |
| 2 | 1.5u | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L7, L8 |
| 2 | 8p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5 |
| 2 | 13p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 1 | 2.3p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 2 | 1n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C9 |
| 5 | 100p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C10, C12, C13, C62 |
| 7 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C11, C14, C16, C17, C29, C52 |
| 4 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C20, C23, C61 |
| 6 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C53, C54, C58, C70, C73 |
| 2 | 82p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C21 |
| 1 | 2.2p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 1 | 10u | CP_Radial_D8.0mm_P5.00mm | C24 |
| 1 | 1u | CP_Radial_D8.0mm_P5.00mm | C25 |
| 1 | 0.05u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C26 |
| 1 | 47u | CP_Radial_D8.0mm_P5.00mm | C27 |
| 1 | 250u | CP_Radial_D8.0mm_P5.00mm | C28 |
| 1 | 100u | CP_Radial_D8.0mm_P5.00mm | C30 |
| 1 | DNC | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31 |
| 3 | 4.7u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C32, C33, C34 |
| 10 | 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C42, C43, C44, C74, C75, C76, C77, C78 +2 |
| 2 | 15p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C45, C46 |
| 2 | 8p-30p | C_Trimmer_Murata_TZC3 | C47, C48 |
| 2 | 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C49, C51 |
| 3 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C50, C66, C69 |
| 6 | 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C55, C56, C57, C63, C64, C65 |
| 2 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C59, C67 |
| 2 | 2.2u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C60, C72 |
| 1 | 47n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C68 |
| 1 | 47u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C71 |
| 8 | 4.7K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R15, R27, R28, R29, R30, R31 |
| 7 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R10, R39, R40, R41, R48 |
| 2 | 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R9 |
| 2 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R12 |
| 2 | 2.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R11 |
| 2 | 560 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R13 |
| 12 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R16, R17, R18, R19, R42, R47, R49 +4 |
| 1 | 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 33 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R21 |
| 3 | 1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R22, R23, R26 |
| 2 | 27 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24, R25 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R33 |
| 2 | 1.5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R35 |
| 1 | 1.18k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36 |
| 1 | 46.4k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R37 |
| 1 | 1.13k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R38 |
| 2 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R43, R45 |
| 1 | 180k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R44 |
| 1 | 255k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R46 |
| 1 | 768k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R50 |
R.A.W.R. design files
The KiCad project lives in the WiktorKociuba/R.A.W.R. repository on GitHub; these links point at the commit this page was built from.
- SchematicR.A.W.R/R.A.W.R.kicad_sch
R.A.W.R.: common questions
What microcontroller does the R.A.W.R. use?
The R.A.W.R. is built around the RP2354A, from the Raspberry Pi family.
How many components are on the R.A.W.R.?
165 components, from 81 distinct parts. The full bill of materials is listed on this page.
Where can I download the R.A.W.R. design files?
From the WiktorKociuba/R.A.W.R. repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the R.A.W.R. design in my own project?
The repository has no license, so all rights stay with WiktorKociuba. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the R.A.W.R. without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507