UVTimer
willy40·UVTimer·Related/KiCad/UVTimer/UVTimer.kicad_pcb
About the UVTimer PCB
UVTimer is an open source ESP32 PCB design by willy40, published on GitHub under the MIT license. It is a 2-layer board measuring 58.5 × 32.1 mm, with 10 components from 10 distinct parts.
Its main chip is the ESP32-C3_SUPERMINI_TH, from the ESP32 family. Other key parts include the CNY17-2 and HLK-PM03. By type, the board carries 4 resistors, 3 ICs, 2 connectors and 1 transistor.
It belongs with the iot & wireless designs in this gallery.
From the project
ESP32-based BLE timer replacement for NE555 in UV nail lamps. Features Android app control and BT136 triac switching.
This project is a modern, BLE-controlled replacement for the traditional NE555 hardware timer used in UV nail lamps. It replaces the legacy analog timer with an ESP32 microcontroller, enabling precise wireless control via an Android application.
This project is designed to upgrade and replace the classic analog circuit based on the NE555 timer and BT134/BT136 triac. For a detailed breakdown of how the original UV lamps operate, their schematics, and common hardware issues, check out this excellent reference article: Project Context & Teardown:** Jak naprawić suszarkę do paznokci (lampę UV)
Main components on the UVTimer
UVTimer bill of materials (BOM)
10 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3_SUPERMINI_TH | MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | CNY17-2 | SMDIP-6_W9.53mm_Clearance8mm | U2 |
| 1 | HLK-PM03 | Converter_ACDC_Hi-Link_HLK-PMxx | U3 |
| 1 | IRFZ44N | TO-220-3_Vertical | Q1 |
| 1 | 220V | TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | J2 |
| 1 | ~ | TerminalBlock_MetzConnect_Type094_RT03503HBLU_1x03_P5.00mm_Horizontal | J3 |
| 1 | 150 | R_1206_3216Metric | R1 |
| 1 | 330 | R_1206_3216Metric | R2 |
| 1 | 0 | R_1206_3216Metric | R3 |
| 1 | 10K | R_1206_3216Metric | R4 |
UVTimer design files
The KiCad project lives in the willy40/UVTimer repository on GitHub; these links point at the commit this page was built from.
UVTimer: common questions
What microcontroller does the UVTimer use?
The UVTimer is built around the ESP32-C3_SUPERMINI_TH, from the ESP32 family.
How big is the UVTimer PCB?
The UVTimer measures 58.5 × 32.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UVTimer?
10 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the UVTimer design files?
From the willy40/UVTimer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the UVTimer design in my own project?
Yes, under the terms of its MIT license, which willy40 chose for the repository.
Can I test firmware for the UVTimer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k