SpinnyKittyCommittee
winsonlin8·SpinnyKittyCommittee·PCB/PCB.kicad_pcb
About the SpinnyKittyCommittee PCB
SpinnyKittyCommittee is an open source PCB design by winsonlin8, published on GitHub under the MIT license. It is a 2-layer board measuring 120 × 97 mm, with 80 components from 33 distinct parts.
Other key parts include the MSPM0G3507SDGS28R, AP33771CFBZ-13-FA01, LT8609EMSE#PBF, AP63203WU-7 and SN74AHCT125N. By type, the board carries 37 capacitors, 23 resistors, 8 switches, 5 ICs, 3 connectors and 2 transistors.
It belongs with the audio designs in this gallery.
From the project
A rhythm-synchronized speaker system featuring a 3D-printed cat that spins and flashes RGB LEDs in time with music — inspired by this video.
A rhythm-synchronized speaker system featuring a 3D-printed cat that spins and flashes RGB LEDs in time with music — inspired by this video.
Group Members: Katherine Han, Evan Ho, Hajime Kioi, Winson Lin
The Spinning Cat Speaker is a custom-built embedded audio system that plays music while driving a DC motor to spin a 3D-printed cat figurine in sync with the beat. An RGB LED ring mounted on the assembly pulses with the music for a visual effect that complements the audio.

Main components on the SpinnyKittyCommittee
SpinnyKittyCommittee bill of materials (BOM)
80 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MSPM0G3507SDGS28R | SOP50P490X110-28N | IC1 |
| 1 | AP33771CFBZ-13-FA01 | AP33771CFBZ13FA01 | IC2 |
| 1 | LT8609EMSE#PBF | SOP50P490X110-11N | IC3 |
| 1 | AP63203WU-7 | AP63203WU7 | IC4 |
| 1 | SN74AHCT125N | DIP794W45P254L1930H508Q14 | U5 |
| 2 | PSMN2R6-30YLC,115 | PSMN2R630YLC115 | Q1, Q2 |
| 1 | UJ20-C-V-SMT-TR-68 | UJ20CVSMTTR68 | J3 |
| 2 | ~ | PinHeader_1x04_P2.54mm_Vertical | J7, J9 |
| 8 | TL3305AF260QG | TL3305AF160QG | S1, S2, S3, S4, S5, S6, S7, S8 |
| 1 | 2.2uH | PM5402222NLT | L1 |
| 1 | 3.9uH | SRR3818A3R9Y | L2 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6 |
| 5 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C10, C29, C35 |
| 4 | 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C21, C22, C31 |
| 13 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C13, C14, C16, C18, C20, C23, C25 +5 |
| 2 | 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C36 |
| 6 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C11, C12, C19, C27, C33 |
| 1 | 10pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 3 | 47uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C17, C24 |
| 1 | 0.47uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R7 |
| 1 | 6.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 5m | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R4 |
| 1 | 200 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 66k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 18.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 187k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 2 | 2.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13 |
| 8 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15, R16, R17, R18, R19, R20, R21 |
| 1 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
SpinnyKittyCommittee design files
The KiCad project lives in the winsonlin8/SpinnyKittyCommittee repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/PCB.kicad_pcb
- SchematicPCB/PCB.kicad_sch
SpinnyKittyCommittee: common questions
How big is the SpinnyKittyCommittee PCB?
The SpinnyKittyCommittee measures 120 × 97 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SpinnyKittyCommittee?
80 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the SpinnyKittyCommittee design files?
From the winsonlin8/SpinnyKittyCommittee repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SpinnyKittyCommittee design in my own project?
Yes, under the terms of its MIT license, which winsonlin8 chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687