ECE496Hardware
wintrmut3·ECE496Hardware·esp32_sensor_node_pcb/esp32_sensor_node.kicad_pcb
About the ECE496Hardware PCB
ECE496Hardware is an open source ESP32 PCB design by wintrmut3, published on GitHub. It is a 4-layer board measuring 49.9 × 59.9 mm, with 24 components from 20 distinct parts.
Its main chip is the ESP32-WROOM-E, from the ESP32 family. Other key parts include the SPX3819M5-L-3-3 and MAX3483AEASA+. By type, the board carries 7 capacitors, 3 ICs, 2 switches, 2 resistors, 1 transistor and 1 connector.
It belongs with the sensors designs in this gallery.
Main components on the ECE496Hardware
ECE496Hardware bill of materials (BOM)
24 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SPX3819M5-L-3-3 | SOT-23-5 | U1 |
| 1 | ESP32-WROOM-E | ESP32-WROOM-32E | U2 |
| 1 | MAX3483AEASA+ | 21-0041B_8_MXM | U3 |
| 1 | 2N7002K | SOT-23 | Q1 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinSocket_2x10_P2.54mm_Vertical | J1 |
| 1 | C492401 Jumper_LED_EN | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Conn_01x03_Socket | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | JST_XH_AIR1 |
| 1 | Conn_01x05_Socket | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | JST_XH_CC1 |
| 1 | Conn_01x04_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | JST_XH_SOIL5V1 |
| 2 | Conn_01x02_Socket | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J_ACT_OUT1, J_PWRIN1 |
| 1 | Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J_PROG1 |
| 2 | SW_DIP_X01 SW_DIP_x01 | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1, SW2 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 2 | 1UF 1uF | C_0603_1608Metric | C1, C5 |
| 1 | 2.2UF 2.2uF | C_0805_2012Metric | C2 |
| 2 | 0.1UF 0.1uF | C_0603_1608Metric | C3, C6 |
| 1 | 22UF 22uF | C_0805_2012Metric | C4 |
| 1 | 0.1uF | C_0603_1608Metric | C7_MAXDECOUP1 |
| 1 | 10K | R_0603_1608Metric | R1 |
| 1 | 2.2K | R_0603_1608Metric | R2 |
ECE496Hardware design files
The KiCad project lives in the wintrmut3/ECE496Hardware repository on GitHub; these links point at the commit this page was built from.
ECE496Hardware: common questions
What microcontroller does the ECE496Hardware use?
The ECE496Hardware is built around the ESP32-WROOM-E, from the ESP32 family.
How big is the ECE496Hardware PCB?
The ECE496Hardware measures 49.9 × 59.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ECE496Hardware?
24 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ECE496Hardware design files?
From the wintrmut3/ECE496Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ECE496Hardware design in my own project?
The repository has no license, so all rights stay with wintrmut3. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ECE496Hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k