19 open source boards using the ESP32-WROOM-E

Real designs built with the ESP32-WROOM-E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the ESP32-WROOM-E

Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the ESP32-WROOM-E connects to, and the resistors, capacitors and other passives placed on it.

  • The EN/CHIP_PU pin has a capacitor to GND on 15 of 18 designs, most often 100 nF (then 10 µF).
  • The EN/CHIP_PU pin has a pull-up to 3.3V on 15 of 18 designs, most often 10 kΩ (then 100 kΩ).
  • The 3V3 pin is tied to 3.3V on 17 of 18 designs.
  • The ADC2_CH2/GPIO2 pin is left unconnected on 11 of 18 designs (a signal on 7).
GNDpin 1, 15, 38Connected to: GND 100%
3V3pin 2Connected to: 3.3V 94%
EN/CHIP_PUpin 3Connected to: A connector 22%
  • Capacitor to GND on 83% · 100 nF (11), 10 µF (3), 1 µF (2)
  • Pull-up to 3.3V on 83% · 10 kΩ (13), 100 kΩ (1), 12 kΩ (1)
NCpin 17, 18, 19, 20, 21, 22, 32Connected to: Not connected 100%
ADC2_CH2/GPIO2pin 24Connected to: Not connected 61% · a signal 39%
GPIO0/BOOT/ADC2_CH1pin 25Connected to: A connector 22%
  • Capacitor to GND on 39% · 100 nF (5), 1 µF (1), 10 µF (1)
  • Pull-up to 3.3V on 39% · 10 kΩ (5), 100 kΩ (1), 12 kΩ (1)
GND_THERMALpin 39Connected to: GND 94%

24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Easyduino ESP32 by Hanqaqa, ESP32-iPod-BLE by maxmacstn, Dif pressure meter by ardiloot and Network and Switch by AkshathRaghav.

The ESP32-WROOM-E in open source designs

The gallery holds 19 open source boards using the ESP32-WROOM-E from 18 GitHub repositories; a typical one measures about 50.6 × 52.1 mm and carries around 34 components.

74% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.

The most starred is Easyduino ESP32 by Hanqaqa.

Microcontrollers on boards using the ESP32-WROOM-E

ESP32-WROOM-E: common questions

Where can I find a ESP32-WROOM-E reference design?

Each of the 19 boards on this page is a real design using the ESP32-WROOM-E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-WROOM-E EN/CHIP_PU pin connected?

The EN/CHIP_PU pin has a capacitor to GND on 15 of 18 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 18 open source designs using the ESP32-WROOM-E.

How is the ESP32-WROOM-E 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 17 of 18 designs. Counted from the KiCad layouts of 18 open source designs using the ESP32-WROOM-E.

How is the ESP32-WROOM-E ADC2_CH2/GPIO2 pin connected?

The ADC2_CH2/GPIO2 pin is left unconnected on 11 of 18 designs (a signal on 7). Counted from the KiCad layouts of 18 open source designs using the ESP32-WROOM-E.

What parts are used alongside the ESP32-WROOM-E?

The AMS1117-3.3, CH340C, CP2102N-Axx-xQFN28, AP2112K-3.3 and TP4056-42-ESOP8 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-WROOM-E use?

Most are built on ESP32 (19).

How big is a typical board using the ESP32-WROOM-E?

The median is 50.6 × 52.1 mm, and 74% are two-layer designs.

What is the most popular open source board using the ESP32-WROOM-E?

By GitHub stars, Easyduino ESP32 by Hanqaqa, with 754 stars.

Can I simulate one of these boards using the ESP32-WROOM-E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part