Controller

WojtaCZ·cern-clock·hardware/controller/controller.kicad_pcb

Controller PCB layout, top view — open source RP2040/RP2350 board by WojtaCZ

About the Controller PCB

Controller is an open source RP2040/RP2350 PCB design by WojtaCZ, published on GitHub. It is a 2-layer board measuring 50.6 × 129 mm, with 31 components from 17 distinct parts.

Its main chip is the PicoW, from the RP2040/RP2350 family. Other key parts include the SN74LXC8T245, USBLC6-2SC6, LIS2DW12 and SN74HCS244. By type, the board carries 12 capacitors, 8 resistors, 5 ICs, 2 transistors, 2 connectors and 1 speaker.

Main components on the Controller

SN74LXC8T245PicoWUSBLC6-2SC6LIS2DW12SN74HCS244

Controller bill of materials (BOM)

31 components, 17 distinct parts.

QtyPartRefs
1
SN74LXC8T245
U1
1
PicoW
U2
1
USBLC6-2SC6
U3
1
LIS2DW12
U4
1
SN74HCS244
U6
2
BSS138
Q1, Q2
1
Conn_02x32_Odd_Even
J1
1
USB4800
J3
1
PKMCS0909E
LS1
1
LED FILAMENT
D1
6
10u
C1, C7, C8, C11, C12, C13
6
100n
C3, C4, C5, C6, C9, C10
2
5k1
R1, R2
3
10k
R5, R7, R8
1
33
R6
1
100
R9
1
1k
R10

Controller design files

The KiCad project lives in the WojtaCZ/cern-clock repository on GitHub; these links point at the commit this page was built from.

Controller: common questions

What microcontroller does the Controller use?

The Controller is built around the PicoW, from the RP2040/RP2350 family.

How big is the Controller PCB?

The Controller measures 50.6 × 129 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Controller?

31 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Controller design files?

From the WojtaCZ/cern-clock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Controller design in my own project?

The repository has no license, so all rights stay with WojtaCZ. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in cern-clock

Similar boards