13 open source boards using the LIS2DW12

Real designs built with the LIS2DW12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the LIS2DW12

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the LIS2DW12 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
  • The VDD_IO pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
  • The RES pin is tied to GND on 8 of 9 designs.
  • The SCL/SPC pin has a pull-up to 3.3V on 5 of 9 designs, most often 4.7 kΩ (then 5.1 kΩ).
SCL/SPCpin 1Connected to: The microcontroller 67%
  • Pull-up to 3.3V on 56% · 4.7 kΩ (4), 5.1 kΩ (1)
CSpin 2Connected to: 3.3V 44% · a signal 44%
  • Capacitor to GND on 56% · 100 nF (13), 1 µF (2), 10 µF (1)
SDA/SDIpin 4Connected to: The microcontroller 56%
  • Pull-up to 3.3V on 56% · 4.7 kΩ (4), 5.1 kΩ (1)
NCpin 5Connected to: Not connected 67% · GND 22%
GNDpin 6, 8Connected to: GND 89%
RESpin 7Connected to: GND 89%
VDDpin 9Connected to: 3.3V 89%
  • Decoupling capacitor on 100% · 100 nF (19), 1 µF (5), 10 µF (3)
VDD_IOpin 10Connected to: 3.3V 89%
  • Decoupling capacitor on 100% · 100 nF (19), 1 µF (5), 10 µF (4)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include StealthBurner CAN Main by CharlieYu4994, Densor by TUDSSL, Duet3-ScanningZProbe by Duet3D and Iot risk logger stm32l4 by polesskiy-dev.

The LIS2DW12 in open source designs

The gallery holds 13 open source boards using the LIS2DW12 from 9 GitHub repositories; a typical one measures about 55 × 55 mm and carries around 60 components.

77% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.

The most starred is StealthBurner CAN Main by CharlieYu4994.

Parts used alongside the LIS2DW12

Microcontrollers on boards using the LIS2DW12

LIS2DW12: common questions

Where can I find a LIS2DW12 reference design?

Each of the 13 boards on this page is a real design using the LIS2DW12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LIS2DW12 VDD pin?

The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the LIS2DW12.

What decoupling capacitors do designs use on the LIS2DW12 VDD_IO pin?

The VDD_IO pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the LIS2DW12.

How is the LIS2DW12 RES pin connected?

The RES pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the LIS2DW12.

Which microcontrollers do boards using the LIS2DW12 use?

Most are built on RP2040/RP2350 (5), ESP32 (4), STM32 (2) and Microchip SAM (1).

How big is a typical board using the LIS2DW12?

The median is 55 × 55 mm, and 77% are two-layer designs.

What is the most popular open source board using the LIS2DW12?

By GitHub stars, StealthBurner CAN Main by CharlieYu4994, with 10 stars.

Can I simulate one of these boards using the LIS2DW12 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part