Controller rounded
WojtaCZ·cern-clock·hardware/controller/controller-rounded.kicad_pcb
About the Controller rounded PCB
Controller rounded is an open source RP2040/RP2350 PCB design by WojtaCZ, published on GitHub. It is a 2-layer board measuring 50.6 × 129 mm, with 31 components from 17 distinct parts.
Its main chip is the PicoW, from the RP2040/RP2350 family. Other key parts include the SN74LXC8T245, USBLC6-2SC6, LIS2DW12 and SN74HCS244. By type, the board carries 12 capacitors, 8 resistors, 5 ICs, 2 transistors, 2 connectors and 1 speaker.
Main components on the Controller rounded
Controller rounded bill of materials (BOM)
31 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74LXC8T245 | TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
| 1 | PicoW | RPi_PicoW_SMD_TH | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | LIS2DW12 | LGA-12_2x2mm_P0.5mm | U4 |
| 1 | SN74HCS244 | TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 1 | Conn_02x32_Odd_Even | PinSocket_2x32_P2.54mm_Vertical_SMD | J1 |
| 1 | USB4800 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J3 |
| 1 | PKMCS0909E | Buzzer_Murata_PKMCS0909E | LS1 |
| 1 | LED FILAMENT | Con_01x02_2.54_SMD | D1 |
| 6 | 10u | C_0603_1608Metric | C1, C7, C8, C11, C12, C13 |
| 6 | 100n | C_0603_1608Metric | C3, C4, C5, C6, C9, C10 |
| 2 | 5k1 | R_0603_1608Metric | R1, R2 |
| 3 | 10k | R_0603_1608Metric | R5, R7, R8 |
| 1 | 33 | R_0603_1608Metric | R6 |
| 1 | 100 | R_0603_1608Metric | R9 |
| 1 | 1k | R_0603_1608Metric | R10 |
Controller rounded design files
The KiCad project lives in the WojtaCZ/cern-clock repository on GitHub; these links point at the commit this page was built from.
Controller rounded: common questions
What microcontroller does the Controller rounded use?
The Controller rounded is built around the PicoW, from the RP2040/RP2350 family.
How big is the Controller rounded PCB?
The Controller rounded measures 50.6 × 129 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Controller rounded?
31 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Controller rounded design files?
From the WojtaCZ/cern-clock repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Controller rounded design in my own project?
The repository has no license, so all rights stay with WojtaCZ. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Controller rounded without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in cern-clock
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k