Latte hw
WojtaCZ·latte-hw
About the Latte hw PCB
Latte hw is an open source RP2040/RP2350 PCB design by WojtaCZ, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 50 × 50 mm, with 75 components from 29 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVSNIQ, TLV70033_SOT23-5, USBLC6-2SC6 and FSUSB30UMX. By type, the board carries 21 resistors, 19 capacitors, 16 diodes, 8 ICs, 7 connectors and 1 transistor.
From the project
An open source USB device latency tester
Main components on the Latte hw
Latte hw bill of materials (BOM)
75 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q16JVSNIQ | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TLV70033_SOT23-5 | SOT-23-5 | U3 |
| 4 | USBLC6-2SC6 | SOT-23-6 | U4, U5, U7, U8 |
| 1 | FSUSB30UMX | UQFN-10_1.3x1.8mm_P0.4mm | U6 |
| 1 | IRLML0030 | SOT-23 | Q1 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | SOIC bite | SOIC_clipProgSmall | J1 |
| 2 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2, J3 |
| 1 | USB_C_2.0 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J4 |
| 1 | USB_A | USB_A_Molex_67643_Horizontal | J5 |
| 1 | OUT1 | TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | SMART PROBE | RJ45_Amphenol_54602-x08_Horizontal | J7 |
| 1 | 1A | Fuse_0603_1608Metric | F1 |
| 1 | USB BOOT | SW_SPST_EVQPE1 | SW1 |
| 3 | PMEG3020EH | D_SOD-123F | D1, D2, D14 |
| 7 | BAV99 | SOT-23 | D3, D4, D11, D12, D15, D16, D17 |
| 6 | LED | LED_0603_1608Metric | D5, D6, D7, D8, D9, D10 |
| 4 | 1u | C_0603_1608Metric | C1, C3, C7, C17 |
| 13 | 100n | C_0603_1608Metric | C2, C4, C8, C9, C10, C11, C12, C13 +5 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10p | C_0603_1608Metric | C5, C6 |
| 4 | 5k1 | R_0603_1608Metric | R1, R2, R3, R4 |
| 3 | 10k | R_0603_1608Metric | R5, R6, R20 |
| 6 | 1k | R_0603_1608Metric | R7, R15, R16, R17, R18, R19 |
| 2 | 27R4 | R_0603_1608Metric | R8, R9 |
| 3 | 22k | R_0603_1608Metric | R10, R11, R30 |
| 1 | 100R | R_0603_1608Metric | R22 |
| 1 | 4k7 | R_0603_1608Metric | R24 |
| 1 | 33k | R_0603_1608Metric | R31 |
Latte hw design files
The KiCad project lives in the WojtaCZ/latte-hw repository on GitHub; these links point at the commit this page was built from.
- Layoutlatte.kicad_pcb
- Schematiclatte.kicad_sch
Latte hw: common questions
What microcontroller does the Latte hw use?
The Latte hw is built around the RP2040, from the RP2040/RP2350 family.
How big is the Latte hw PCB?
The Latte hw measures 50 × 50 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Latte hw?
75 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Latte hw design files?
From the WojtaCZ/latte-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Latte hw design in my own project?
Yes, under the terms of its GPL-3.0 license, which WojtaCZ chose for the repository.
Can I test firmware for the Latte hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k