28 open source boards using the W25Q16JVSNIQ

Real designs built with the W25Q16JVSNIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

28 boardsClear filters|Most starred

How designs wire the W25Q16JVSNIQ

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the W25Q16JVSNIQ connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 2.2 µF).
  • The CS pin has a series resistor on 8 of 20 designs, most often 1 kΩ (then 1.5 kΩ).
CSpin 1Connected to: The microcontroller 55%
  • Series resistor on 40% · 1 kΩ (7), 1.5 kΩ (1)
  • Pull-up to 3.3V on 35% · 10 kΩ (7)
IO2pin 3Connected to: The microcontroller 40%
  • Pull-up to 3.3V on 35% · 47 kΩ (4), 10 kΩ (3)
GNDpin 4Connected to: GND 90%
IO3pin 7Connected to: The microcontroller 40%
  • Pull-up to 3.3V on 35% · 47 kΩ (4), 10 kΩ (3)
VCCpin 8Connected to: 3.3V 90%
  • Decoupling capacitor on 75% · 100 nF (21), 2.2 µF (1), 100 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SF2000 by jbilander, SCAN2000 by PatrickBaus, Logic analyzer by tomverbeure and Headphone-DAC-AMP by ddabidov.

The W25Q16JVSNIQ in open source designs

The gallery holds 28 open source boards using the W25Q16JVSNIQ from 20 GitHub repositories; a typical one measures about 90 × 70 mm and carries around 76 components.

71% use four copper layers or more, and 39% carry an open source license.

The most starred is SF2000 by jbilander.

Microcontrollers on boards using the W25Q16JVSNIQ

W25Q16JVSNIQ: common questions

Where can I find a W25Q16JVSNIQ reference design?

Each of the 28 boards on this page is a real design using the W25Q16JVSNIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q16JVSNIQ VCC pin?

The VCC pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 20 open source designs using the W25Q16JVSNIQ.

What resistor goes on the W25Q16JVSNIQ CS pin?

The CS pin has a series resistor on 8 of 20 designs, most often 1 kΩ (then 1.5 kΩ). Counted from the KiCad layouts of 20 open source designs using the W25Q16JVSNIQ.

What parts are used alongside the W25Q16JVSNIQ?

The RP2040, WM8524CGEDT, 74CBTLV3126PW,118, 74LVC4245APW_118 and AMS1117-1.2 appear in the most repositories here.

Which microcontrollers do boards using the W25Q16JVSNIQ use?

Most are built on RP2040/RP2350 (15), ESP32 (4), FPGA (3) and STM32 (1).

How big is a typical board using the W25Q16JVSNIQ?

The median is 90 × 70 mm, and 29% are two-layer designs.

What is the most popular open source board using the W25Q16JVSNIQ?

By GitHub stars, SF2000 by jbilander, with 32 stars.

Can I simulate one of these boards using the W25Q16JVSNIQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part