Smart demand response gateway
wootcot·smart-demand-response-gateway·hardware/design-files/gateway.kicad_pcb
About the Smart demand response gateway PCB
Smart demand response gateway is an open source ESP32 PCB design by wootcot, published on GitHub. It is a 2-layer board measuring 46.8 × 33.4 mm, with 8 components from 7 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the ADS1115IDGSR. By type, the board carries 2 ICs, 2 connectors, 2 resistors, 1 relay and 1 capacitor.
It belongs with the power & battery designs in this gallery.
From the project
Distributed Demand-Response Smart Gateway: Nepal-Grid Peak Load Controller
1. Install KiCad 10.x 2. Open KiCad → File → Open Project 3. Navigate to hardware/design-files/gateway.kicadpro`
The design uses hierarchical sheets for clarity and modularity:
The PCB is divided into two distinct domains separated by a >6mm creepage barrier:
- AC Domain (left): Fuse, TVS, HLK-PM01, relay contacts, terminal blocks - DC Domain (right): ESP32, CT sensor interface, optocoupler logic side, LEDs
Main components on the Smart demand response gateway
Smart demand response gateway bill of materials (BOM)
8 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E ESP32 DevKit Espressif | PinHeader_1x06_P2.54mm_Vertical | U4 |
| 1 | ADS1115IDGSR ADS1115IDGS Texas Instruments | TSSOP-10_3x3mm_P0.5mm | U5 |
| 1 | 1729018 Conn_01x02 Phoenix Contact | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SCT-013-030 YHDC | Jack_3.5mm_Switronic_ST-005-G_horizontal | J2 |
| 1 | SRD-05VDC-SL-C Screw_Terminal_01x04 Songle | PinHeader_1x04_P2.54mm_Vertical | K1 |
| 1 | CL21A106KPFNNNE 10uF Samsung | C_0805_2012Metric | C4 |
| 2 | RC0805FR-0710KL 10K 1% Yageo | R_0805_2012Metric | R2, R3 |
Smart demand response gateway design files
The KiCad project lives in the wootcot/smart-demand-response-gateway repository on GitHub; these links point at the commit this page was built from.
Smart demand response gateway: common questions
What microcontroller does the Smart demand response gateway use?
The Smart demand response gateway is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the Smart demand response gateway PCB?
The Smart demand response gateway measures 46.8 × 33.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart demand response gateway?
8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smart demand response gateway design files?
From the wootcot/smart-demand-response-gateway repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Smart demand response gateway design in my own project?
The repository has no license, so all rights stay with wootcot. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart demand response gateway without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k