PiPower v2
About the PiPower v2 PCB
PiPower v2 is an open source PCB design by wyolum, published on GitHub under the MIT license. It is a 2-layer board measuring 56 × 56 mm, with 81 components from 56 distinct parts.
Other key parts include the MCP73831, TPS62163, TPS2115A, TPS61200 and MAX17040. By type, the board carries 22 resistors, 18 capacitors, 14 connectors, 7 diodes, 5 ICs and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.
Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.
Main components on the PiPower v2
PiPower v2 bill of materials (BOM)
81 components, 56 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831 | MCP73831 | U1 |
| 1 | TPS62163 | TPS62163_DSG | U2 |
| 1 | TPS2115A | TPS2115_SON | U3 |
| 1 | TPS61200 | TPS61200_QFN10 | U4 |
| 1 | MAX17040 | MAX17040_TDFN | U5 |
| 1 | IRF7319 | SO8E | Q2 |
| 1 | MicroUSB_in | USB_B_Micro | J1 |
| 1 | LiPo_JST | CONN_JST-2_SMD | J2 |
| 1 | USB_A_out | USB_A | J3 |
| 1 | Auto_On | Header_3 | J4 |
| 1 | 5V_USB | Header_2 | J5 |
| 1 | 5V_EXT | Header_2 | J6 |
| 1 | 5V_OUT | Header_2 | J7 |
| 1 | VBAT | Header_2 | J8 |
| 1 | 5V_BAT | Header_2 | J9 |
| 1 | 5V_Pi | Header_2 | J10 |
| 1 | 12V_Out | Header2x2 | J11 |
| 1 | 5V_IN | Header_3 | J12 |
| 1 | RASPI_GPIO | Header_GPIO_3 | P1 |
| 1 | V_IN | JACK_ALIM | P2 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NANOSMDC110F | f_1206 | F1 |
| 2 | MH | vite_3mm | H1, H2 |
| 1 | PCB | PCB | PCB1 |
| 1 | BAT | ShortLink | SJ1 |
| 1 | 5V_OUT | ShortLink | SJ2 |
| 1 | D0 | ShortLink | SJ3 |
| 1 | D1 | ShortLink | SJ4 |
| 1 | STAT | ShortLink2 | SJ5 |
| 1 | 5V_Pi | ShortLink | SJ6 |
| 1 | ON_OFF | SW_PB_V_H | SW1 |
| 1 | TP | Breakout | TP1 |
| 1 | SMBJ5.0CA | diode-DO214AA | D2 |
| 1 | DIS | led_0805 | D3 |
| 1 | CHG | led_0805 | D4 |
| 1 | BAT | led_0805 | D6 |
| 1 | 5V_OUT | led_0805 | D7 |
| 1 | 5V_Pi | led_0805 | D8 |
| 1 | LSM115J | diode-DO214BA | D9 |
| 1 | 4u7H,1.2A | Inductor_SMD1 | L1 |
| 1 | 2u2H,1.9A | Inductor_SMD2 | L2 |
| 8 | 100nF | c_0805 | C1, C4, C7, C8, C11, C12, C13, C16 |
| 7 | 10uF X7R | c_1206 | C2, C5, C6, C9, C10, C14, C18 |
| 1 | 22uF X7R | c_1210 | C3 |
| 2 | 1uF | c_0805 | C15, C17 |
| 4 | 2k2 | r_0805 | R1, R2, R6, R9 |
| 1 | 2k | r_0805 | R3 |
| 2 | 2M | r_0805 | R4, R8 |
| 3 | 100k | r_0805 | R5, R19, R20 |
| 1 | 470E | r_0805 | R10 |
| 1 | 1k5 | r_0805 | R11 |
| 2 | 220k | r_0805 | R12, R13 |
| 2 | 1k | r_0805 | R14, R21 |
| 1 | 150E | r_0805 | R15 |
| 3 | 10k | r_0805 | R16, R17, R18 |
| 1 | 300k | r_0805 | R22 |
| 1 | 470k | r_0805 | R23 |
PiPower v2 design files
The KiCad project lives in the wyolum/pi-power repository on GitHub; these links point at the commit this page was built from.
PiPower v2: common questions
How big is the PiPower v2 PCB?
The PiPower v2 measures 56 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PiPower v2?
81 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PiPower v2 design files?
From the wyolum/pi-power repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PiPower v2 design in my own project?
Yes, under the terms of its MIT license, which wyolum chose for the repository.
More boards in pi-power
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k